diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md
index ef301a74..a0eecf01 100644
--- a/docs/Config_Reference.md
+++ b/docs/Config_Reference.md
@@ -468,15 +468,6 @@ position are known to not work properly.
 ```
 [printer]
 kinematics: polar
-
-# The stepper_bed section is used to describe the stepper controlling
-# the bed.
-[stepper_bed]
-gear_ratio:
-#   A gear_ratio must be specified and rotation_distance may not be
-#   specified. For example, if the bed has an 80 toothed pulley driven
-#   by a stepper with a 16 toothed pulley then one would specify a
-#   gear ratio of "80:16". This parameter must be provided.
 max_z_velocity:
 #   This sets the maximum velocity (in mm/s) of movement along the z
 #   axis. This setting can be used to restrict the maximum speed of
@@ -487,6 +478,15 @@ max_z_accel:
 #   the z axis. It limits the acceleration of the z stepper motor. The
 #   default is to use max_accel for max_z_accel.
 
+# The stepper_bed section is used to describe the stepper controlling
+# the bed.
+[stepper_bed]
+gear_ratio:
+#   A gear_ratio must be specified and rotation_distance may not be
+#   specified. For example, if the bed has an 80 toothed pulley driven
+#   by a stepper with a 16 toothed pulley then one would specify a
+#   gear ratio of "80:16". This parameter must be provided.
+
 # The stepper_arm section is used to describe the stepper controlling
 # the carriage on the arm.
 [stepper_arm]