diff --git a/lib/README b/lib/README
index f8e4d5f2..a388b862 100644
--- a/lib/README
+++ b/lib/README
@@ -46,6 +46,10 @@ The stm32f1 directory contains code from STMicroelectronics:
http://www.st.com/en/embedded-software/stm32cubef1.html
version 1.8.0 (extracted 20190721).
+The stm32f2 directory contains code from STMicroelectronics:
+ https://www.st.com/content/st_com/en/products/embedded-software/mcu-mpu-embedded-software/stm32-embedded-software/stm32cube-mcu-mpu-packages/stm32cubef2.html
+version 1.9.0 (extracted 20200614).
+
The stm32f4 directory contains code from STMicroelectronics:
http://www.st.com/en/embedded-software/stm32cubef4.html
version 1.24.0 (extracted 20190723).
diff --git a/lib/stm32f2/include/stm32f205xx.h b/lib/stm32f2/include/stm32f205xx.h
new file mode 100644
index 00000000..cdc64d1a
--- /dev/null
+++ b/lib/stm32f2/include/stm32f205xx.h
@@ -0,0 +1,13717 @@
+/**
+ ******************************************************************************
+ * @file stm32f205xx.h
+ * @author MCD Application Team
+ * @brief CMSIS STM32F205xx Device Peripheral Access Layer Header File.
+ *
+ * This file contains :
+ * - Data structures and the address mapping for all peripherals
+ * - Peripherals registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ *
© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f205xx
+ * @{
+ */
+
+#ifndef __STM32F205xx_H
+#define __STM32F205xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#define __CM3_REV 0x0200U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F2XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F2XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F2XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M3 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */
+ OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */
+ OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */
+ OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */
+ RNG_IRQn = 80 /*!< Rng global interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+#include "system_stm32f2xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */
+} FLASH_TypeDef;
+
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FSMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */
+ __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */
+ __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */
+ __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+ uint32_t RESERVED0; /*!< Reserved, 0x70 */
+ __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */
+ uint32_t RESERVED1; /*!< Reserved, 0x78 */
+ uint32_t RESERVED2; /*!< Reserved, 0x7C */
+ __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */
+ __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */
+ __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */
+ __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+ uint32_t RESERVED3; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */
+} FSMC_Bank2_3_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */
+ __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */
+ __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */
+ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */
+ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */
+} FSMC_Bank4_TypeDef;
+
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ uint32_t RESERVED1; /*!< Reserved, 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ uint32_t RESERVED3; /*!< Reserved, 0x38 */
+ uint32_t RESERVED4; /*!< Reserved, 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ uint32_t RESERVED5; /*!< Reserved, 0x44 */
+ uint32_t RESERVED6; /*!< Reserved, 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __IO const uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __IO const uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __IO const uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __IO const uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __IO const uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __IO const uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __IO const uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __IO const uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /* IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE 0x08000000UL /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000UL /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE 0x2001C000UL /*!< SRAM2(16 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000UL /*!< Backup SRAM(4 KB) base address in the alias region */
+#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */
+#define SRAM1_BB_BASE 0x22000000UL /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE 0x22380000UL /*!< SRAM2(16 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000UL /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x080FFFFFUL /*!< FLASH end address */
+#define FLASH_OTP_BASE 0x1FFF7800UL /*!< Base address of : (up to 528 Bytes) embedded FLASH OTP Area */
+#define FLASH_OTP_END 0x1FFF7A0FUL /*!< End address of : (up to 528 Bytes) embedded FLASH OTP Area */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000UL)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400UL)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400UL)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000UL)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100UL)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200UL)
+#define ADC123_COMMON_BASE (APB2PERIPH_BASE + 0x2300UL)
+/* Legacy define */
+#define ADC_BASE ADC123_COMMON_BASE
+
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00UL)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800UL)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00UL)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000UL)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400UL)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800UL)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000UL)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400UL)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800UL)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00UL)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000UL)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400UL)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800UL)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00UL)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000UL)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800UL)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00UL)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000UL)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400UL)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL)
+
+/*!< AHB2 peripherals */
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800UL)
+
+/*!< FSMC Bankx registers base address */
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000UL)
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104UL)
+#define FSMC_Bank2_3_R_BASE (FSMC_R_BASE + 0x0060UL)
+#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0UL)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000UL
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE 0x40040000UL
+#define USB_OTG_FS_PERIPH_BASE 0x50000000UL
+
+#define USB_OTG_GLOBAL_BASE 0x000UL
+#define USB_OTG_DEVICE_BASE 0x800UL
+#define USB_OTG_IN_ENDPOINT_BASE 0x900UL
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00UL
+#define USB_OTG_EP_REG_SIZE 0x20UL
+#define USB_OTG_HOST_BASE 0x400UL
+#define USB_OTG_HOST_PORT_BASE 0x440UL
+#define USB_OTG_HOST_CHANNEL_BASE 0x500UL
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20UL
+#define USB_OTG_PCGCCTL_BASE 0xE00UL
+#define USB_OTG_FIFO_BASE 0x1000UL
+#define USB_OTG_FIFO_SIZE 0x1000UL
+
+/******************* Device electronic signature ***************/
+#define UID_BASE 0x1FFF7A10UL /*!< Unique device ID register base address */
+#define FLASHSIZE_BASE 0x1FFF7A22UL /*!< FLASH Size register base address */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE)
+/* Legacy define */
+#define ADC ADC123_COMMON
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *) FSMC_Bank2_3_R_BASE)
+#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD_Pos (0U)
+#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */
+#define ADC_SR_AWD ADC_SR_AWD_Msk /*!© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f207xx
+ * @{
+ */
+
+#ifndef __STM32F207xx_H
+#define __STM32F207xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#define __CM3_REV 0x0200U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F2XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F2XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F2XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M3 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ ETH_IRQn = 61, /*!< Ethernet global Interrupt */
+ ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */
+ OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */
+ OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */
+ OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */
+ DCMI_IRQn = 78, /*!< DCMI global interrupt */
+ RNG_IRQn = 80 /*!< Rng global interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+#include "system_stm32f2xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DCMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */
+ __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */
+ __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */
+ __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */
+ __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */
+ __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+ __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */
+ __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */
+ __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief Ethernet MAC
+ */
+
+typedef struct
+{
+ __IO uint32_t MACCR;
+ __IO uint32_t MACFFR;
+ __IO uint32_t MACHTHR;
+ __IO uint32_t MACHTLR;
+ __IO uint32_t MACMIIAR;
+ __IO uint32_t MACMIIDR;
+ __IO uint32_t MACFCR;
+ __IO uint32_t MACVLANTR; /* 8 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t MACRWUFFR; /* 11 */
+ __IO uint32_t MACPMTCSR;
+ uint32_t RESERVED1;
+ __IO uint32_t MACDBGR;
+ __IO uint32_t MACSR; /* 15 */
+ __IO uint32_t MACIMR;
+ __IO uint32_t MACA0HR;
+ __IO uint32_t MACA0LR;
+ __IO uint32_t MACA1HR;
+ __IO uint32_t MACA1LR;
+ __IO uint32_t MACA2HR;
+ __IO uint32_t MACA2LR;
+ __IO uint32_t MACA3HR;
+ __IO uint32_t MACA3LR; /* 24 */
+ uint32_t RESERVED2[40];
+ __IO uint32_t MMCCR; /* 65 */
+ __IO uint32_t MMCRIR;
+ __IO uint32_t MMCTIR;
+ __IO uint32_t MMCRIMR;
+ __IO uint32_t MMCTIMR; /* 69 */
+ uint32_t RESERVED3[14];
+ __IO uint32_t MMCTGFSCCR; /* 84 */
+ __IO uint32_t MMCTGFMSCCR;
+ uint32_t RESERVED4[5];
+ __IO uint32_t MMCTGFCR;
+ uint32_t RESERVED5[10];
+ __IO uint32_t MMCRFCECR;
+ __IO uint32_t MMCRFAECR;
+ uint32_t RESERVED6[10];
+ __IO uint32_t MMCRGUFCR;
+ uint32_t RESERVED7[334];
+ __IO uint32_t PTPTSCR;
+ __IO uint32_t PTPSSIR;
+ __IO uint32_t PTPTSHR;
+ __IO uint32_t PTPTSLR;
+ __IO uint32_t PTPTSHUR;
+ __IO uint32_t PTPTSLUR;
+ __IO uint32_t PTPTSAR;
+ __IO uint32_t PTPTTHR;
+ __IO uint32_t PTPTTLR;
+ __IO uint32_t RESERVED8;
+ __IO uint32_t PTPTSSR;
+ uint32_t RESERVED9[565];
+ __IO uint32_t DMABMR;
+ __IO uint32_t DMATPDR;
+ __IO uint32_t DMARPDR;
+ __IO uint32_t DMARDLAR;
+ __IO uint32_t DMATDLAR;
+ __IO uint32_t DMASR;
+ __IO uint32_t DMAOMR;
+ __IO uint32_t DMAIER;
+ __IO uint32_t DMAMFBOCR;
+ __IO uint32_t DMARSWTR;
+ uint32_t RESERVED10[8];
+ __IO uint32_t DMACHTDR;
+ __IO uint32_t DMACHRDR;
+ __IO uint32_t DMACHTBAR;
+ __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */
+} FLASH_TypeDef;
+
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FSMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */
+ __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */
+ __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */
+ __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+ uint32_t RESERVED0; /*!< Reserved, 0x70 */
+ __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */
+ uint32_t RESERVED1; /*!< Reserved, 0x78 */
+ uint32_t RESERVED2; /*!< Reserved, 0x7C */
+ __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */
+ __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */
+ __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */
+ __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+ uint32_t RESERVED3; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */
+} FSMC_Bank2_3_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */
+ __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */
+ __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */
+ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */
+ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */
+} FSMC_Bank4_TypeDef;
+
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ uint32_t RESERVED1; /*!< Reserved, 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ uint32_t RESERVED3; /*!< Reserved, 0x38 */
+ uint32_t RESERVED4; /*!< Reserved, 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ uint32_t RESERVED5; /*!< Reserved, 0x44 */
+ uint32_t RESERVED6; /*!< Reserved, 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __IO const uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __IO const uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __IO const uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __IO const uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __IO const uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __IO const uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __IO const uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __IO const uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /* IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE 0x08000000UL /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000UL /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE 0x2001C000UL /*!< SRAM2(16 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000UL /*!< Backup SRAM(4 KB) base address in the alias region */
+#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */
+#define SRAM1_BB_BASE 0x22000000UL /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE 0x22380000UL /*!< SRAM2(16 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000UL /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x080FFFFFUL /*!< FLASH end address */
+#define FLASH_OTP_BASE 0x1FFF7800UL /*!< Base address of : (up to 528 Bytes) embedded FLASH OTP Area */
+#define FLASH_OTP_END 0x1FFF7A0FUL /*!< End address of : (up to 528 Bytes) embedded FLASH OTP Area */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000UL)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400UL)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400UL)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000UL)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100UL)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200UL)
+#define ADC123_COMMON_BASE (APB2PERIPH_BASE + 0x2300UL)
+/* Legacy define */
+#define ADC_BASE ADC123_COMMON_BASE
+
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00UL)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800UL)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00UL)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000UL)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400UL)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800UL)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000UL)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400UL)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800UL)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00UL)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000UL)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400UL)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800UL)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00UL)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000UL)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800UL)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00UL)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000UL)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400UL)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL)
+#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL)
+#define ETH_MAC_BASE (ETH_BASE)
+#define ETH_MMC_BASE (ETH_BASE + 0x0100UL)
+#define ETH_PTP_BASE (ETH_BASE + 0x0700UL)
+#define ETH_DMA_BASE (ETH_BASE + 0x1000UL)
+
+/*!< AHB2 peripherals */
+#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000UL)
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800UL)
+
+/*!< FSMC Bankx registers base address */
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000UL)
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104UL)
+#define FSMC_Bank2_3_R_BASE (FSMC_R_BASE + 0x0060UL)
+#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0UL)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000UL
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE 0x40040000UL
+#define USB_OTG_FS_PERIPH_BASE 0x50000000UL
+
+#define USB_OTG_GLOBAL_BASE 0x000UL
+#define USB_OTG_DEVICE_BASE 0x800UL
+#define USB_OTG_IN_ENDPOINT_BASE 0x900UL
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00UL
+#define USB_OTG_EP_REG_SIZE 0x20UL
+#define USB_OTG_HOST_BASE 0x400UL
+#define USB_OTG_HOST_PORT_BASE 0x440UL
+#define USB_OTG_HOST_CHANNEL_BASE 0x500UL
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20UL
+#define USB_OTG_PCGCCTL_BASE 0xE00UL
+#define USB_OTG_FIFO_BASE 0x1000UL
+#define USB_OTG_FIFO_SIZE 0x1000UL
+
+/******************* Device electronic signature ***************/
+#define UID_BASE 0x1FFF7A10UL /*!< Unique device ID register base address */
+#define FLASHSIZE_BASE 0x1FFF7A22UL /*!< FLASH Size register base address */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE)
+/* Legacy define */
+#define ADC ADC123_COMMON
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH ((ETH_TypeDef *) ETH_BASE)
+#define DCMI ((DCMI_TypeDef *) DCMI_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *) FSMC_Bank2_3_R_BASE)
+#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD_Pos (0U)
+#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */
+#define ADC_SR_AWD ADC_SR_AWD_Msk /*!© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f215xx
+ * @{
+ */
+
+#ifndef __STM32F215xx_H
+#define __STM32F215xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#define __CM3_REV 0x0200U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F2XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F2XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F2XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M3 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */
+ OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */
+ OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */
+ OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */
+ CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */
+ HASH_RNG_IRQn = 80 /*!< Hash and Rng global interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+#include "system_stm32f2xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */
+} FLASH_TypeDef;
+
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FSMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */
+ __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */
+ __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */
+ __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+ uint32_t RESERVED0; /*!< Reserved, 0x70 */
+ __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */
+ uint32_t RESERVED1; /*!< Reserved, 0x78 */
+ uint32_t RESERVED2; /*!< Reserved, 0x7C */
+ __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */
+ __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */
+ __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */
+ __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+ uint32_t RESERVED3; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */
+} FSMC_Bank2_3_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */
+ __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */
+ __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */
+ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */
+ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */
+} FSMC_Bank4_TypeDef;
+
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ uint32_t RESERVED1; /*!< Reserved, 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ uint32_t RESERVED3; /*!< Reserved, 0x38 */
+ uint32_t RESERVED4; /*!< Reserved, 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ uint32_t RESERVED5; /*!< Reserved, 0x44 */
+ uint32_t RESERVED6; /*!< Reserved, 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __IO const uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __IO const uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __IO const uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __IO const uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __IO const uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __IO const uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __IO const uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __IO const uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+ * @brief Crypto Processor
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */
+ __IO uint32_t DIN; /*!< CRYP data input register, Address offset: 0x08 */
+ __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */
+ __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */
+ __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */
+ __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */
+ __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */
+ __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */
+ __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */
+ __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */
+ __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */
+ __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */
+ __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */
+ __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */
+ __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */
+ __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */
+ __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */
+ __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */
+ __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */
+} CRYP_TypeDef;
+
+/**
+ * @brief HASH
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */
+ __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */
+ __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */
+ __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */
+ __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */
+ __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */
+ uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */
+ __IO uint32_t CSR[51]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1C0 */
+} HASH_TypeDef;
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /* IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE 0x08000000UL /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000UL /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE 0x2001C000UL /*!< SRAM2(16 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000UL /*!< Backup SRAM(4 KB) base address in the alias region */
+#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */
+#define SRAM1_BB_BASE 0x22000000UL /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE 0x22380000UL /*!< SRAM2(16 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000UL /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x080FFFFFUL /*!< FLASH end address */
+#define FLASH_OTP_BASE 0x1FFF7800UL /*!< Base address of : (up to 528 Bytes) embedded FLASH OTP Area */
+#define FLASH_OTP_END 0x1FFF7A0FUL /*!< End address of : (up to 528 Bytes) embedded FLASH OTP Area */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000UL)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400UL)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400UL)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000UL)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100UL)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200UL)
+#define ADC123_COMMON_BASE (APB2PERIPH_BASE + 0x2300UL)
+/* Legacy define */
+#define ADC_BASE ADC123_COMMON_BASE
+
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00UL)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800UL)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00UL)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000UL)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400UL)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800UL)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000UL)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400UL)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800UL)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00UL)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000UL)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400UL)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800UL)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00UL)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000UL)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800UL)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00UL)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000UL)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400UL)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL)
+
+/*!< AHB2 peripherals */
+#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000UL)
+#define HASH_BASE (AHB2PERIPH_BASE + 0x60400UL)
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800UL)
+
+/*!< FSMC Bankx registers base address */
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000UL)
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104UL)
+#define FSMC_Bank2_3_R_BASE (FSMC_R_BASE + 0x0060UL)
+#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0UL)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000UL
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE 0x40040000UL
+#define USB_OTG_FS_PERIPH_BASE 0x50000000UL
+
+#define USB_OTG_GLOBAL_BASE 0x000UL
+#define USB_OTG_DEVICE_BASE 0x800UL
+#define USB_OTG_IN_ENDPOINT_BASE 0x900UL
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00UL
+#define USB_OTG_EP_REG_SIZE 0x20UL
+#define USB_OTG_HOST_BASE 0x400UL
+#define USB_OTG_HOST_PORT_BASE 0x440UL
+#define USB_OTG_HOST_CHANNEL_BASE 0x500UL
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20UL
+#define USB_OTG_PCGCCTL_BASE 0xE00UL
+#define USB_OTG_FIFO_BASE 0x1000UL
+#define USB_OTG_FIFO_SIZE 0x1000UL
+
+/******************* Device electronic signature ***************/
+#define UID_BASE 0x1FFF7A10UL /*!< Unique device ID register base address */
+#define FLASHSIZE_BASE 0x1FFF7A22UL /*!< FLASH Size register base address */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE)
+/* Legacy define */
+#define ADC ADC123_COMMON
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define CRYP ((CRYP_TypeDef *) CRYP_BASE)
+#define HASH ((HASH_TypeDef *) HASH_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *) FSMC_Bank2_3_R_BASE)
+#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD_Pos (0U)
+#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */
+#define ADC_SR_AWD ADC_SR_AWD_Msk /*!© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f217xx
+ * @{
+ */
+
+#ifndef __STM32F217xx_H
+#define __STM32F217xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#define __CM3_REV 0x0200U /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1U /*!< STM32F2XX provides an MPU */
+#define __NVIC_PRIO_BITS 4U /*!< STM32F2XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F2XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M3 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ ETH_IRQn = 61, /*!< Ethernet global Interrupt */
+ ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */
+ OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */
+ OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */
+ OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */
+ DCMI_IRQn = 78, /*!< DCMI global interrupt */
+ CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */
+ HASH_RNG_IRQn = 80 /*!< Hash and Rng global interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+#include "system_stm32f2xx.h"
+#include
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DCMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */
+ __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */
+ __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */
+ __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */
+ __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */
+ __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+ __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */
+ __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */
+ __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief Ethernet MAC
+ */
+
+typedef struct
+{
+ __IO uint32_t MACCR;
+ __IO uint32_t MACFFR;
+ __IO uint32_t MACHTHR;
+ __IO uint32_t MACHTLR;
+ __IO uint32_t MACMIIAR;
+ __IO uint32_t MACMIIDR;
+ __IO uint32_t MACFCR;
+ __IO uint32_t MACVLANTR; /* 8 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t MACRWUFFR; /* 11 */
+ __IO uint32_t MACPMTCSR;
+ uint32_t RESERVED1;
+ __IO uint32_t MACDBGR;
+ __IO uint32_t MACSR; /* 15 */
+ __IO uint32_t MACIMR;
+ __IO uint32_t MACA0HR;
+ __IO uint32_t MACA0LR;
+ __IO uint32_t MACA1HR;
+ __IO uint32_t MACA1LR;
+ __IO uint32_t MACA2HR;
+ __IO uint32_t MACA2LR;
+ __IO uint32_t MACA3HR;
+ __IO uint32_t MACA3LR; /* 24 */
+ uint32_t RESERVED2[40];
+ __IO uint32_t MMCCR; /* 65 */
+ __IO uint32_t MMCRIR;
+ __IO uint32_t MMCTIR;
+ __IO uint32_t MMCRIMR;
+ __IO uint32_t MMCTIMR; /* 69 */
+ uint32_t RESERVED3[14];
+ __IO uint32_t MMCTGFSCCR; /* 84 */
+ __IO uint32_t MMCTGFMSCCR;
+ uint32_t RESERVED4[5];
+ __IO uint32_t MMCTGFCR;
+ uint32_t RESERVED5[10];
+ __IO uint32_t MMCRFCECR;
+ __IO uint32_t MMCRFAECR;
+ uint32_t RESERVED6[10];
+ __IO uint32_t MMCRGUFCR;
+ uint32_t RESERVED7[334];
+ __IO uint32_t PTPTSCR;
+ __IO uint32_t PTPSSIR;
+ __IO uint32_t PTPTSHR;
+ __IO uint32_t PTPTSLR;
+ __IO uint32_t PTPTSHUR;
+ __IO uint32_t PTPTSLUR;
+ __IO uint32_t PTPTSAR;
+ __IO uint32_t PTPTTHR;
+ __IO uint32_t PTPTTLR;
+ __IO uint32_t RESERVED8;
+ __IO uint32_t PTPTSSR;
+ uint32_t RESERVED9[565];
+ __IO uint32_t DMABMR;
+ __IO uint32_t DMATPDR;
+ __IO uint32_t DMARPDR;
+ __IO uint32_t DMARDLAR;
+ __IO uint32_t DMATDLAR;
+ __IO uint32_t DMASR;
+ __IO uint32_t DMAOMR;
+ __IO uint32_t DMAIER;
+ __IO uint32_t DMAMFBOCR;
+ __IO uint32_t DMARSWTR;
+ uint32_t RESERVED10[8];
+ __IO uint32_t DMACHTDR;
+ __IO uint32_t DMACHRDR;
+ __IO uint32_t DMACHTBAR;
+ __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */
+} FLASH_TypeDef;
+
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FSMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */
+ __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */
+ __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */
+ __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+ uint32_t RESERVED0; /*!< Reserved, 0x70 */
+ __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */
+ uint32_t RESERVED1; /*!< Reserved, 0x78 */
+ uint32_t RESERVED2; /*!< Reserved, 0x7C */
+ __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */
+ __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */
+ __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */
+ __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+ uint32_t RESERVED3; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */
+} FSMC_Bank2_3_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */
+ __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */
+ __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */
+ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */
+ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */
+} FSMC_Bank4_TypeDef;
+
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ uint32_t RESERVED1; /*!< Reserved, 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ uint32_t RESERVED3; /*!< Reserved, 0x38 */
+ uint32_t RESERVED4; /*!< Reserved, 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ uint32_t RESERVED5; /*!< Reserved, 0x44 */
+ uint32_t RESERVED6; /*!< Reserved, 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __IO const uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __IO const uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __IO const uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __IO const uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __IO const uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __IO const uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __IO const uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __IO const uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+ * @brief Crypto Processor
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */
+ __IO uint32_t DIN; /*!< CRYP data input register, Address offset: 0x08 */
+ __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */
+ __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */
+ __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */
+ __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */
+ __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */
+ __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */
+ __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */
+ __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */
+ __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */
+ __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */
+ __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */
+ __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */
+ __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */
+ __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */
+ __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */
+ __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */
+ __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */
+} CRYP_TypeDef;
+
+/**
+ * @brief HASH
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */
+ __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */
+ __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */
+ __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */
+ __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */
+ __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */
+ uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */
+ __IO uint32_t CSR[51]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1C0 */
+} HASH_TypeDef;
+
+/**
+ * @brief RNG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /* IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE 0x08000000UL /*!< FLASH(up to 1 MB) base address in the alias region */
+#define SRAM1_BASE 0x20000000UL /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE 0x2001C000UL /*!< SRAM2(16 KB) base address in the alias region */
+#define PERIPH_BASE 0x40000000UL /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE 0x40024000UL /*!< Backup SRAM(4 KB) base address in the alias region */
+#define FSMC_R_BASE 0xA0000000UL /*!< FSMC registers base address */
+#define SRAM1_BB_BASE 0x22000000UL /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE 0x22380000UL /*!< SRAM2(16 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE 0x42000000UL /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE 0x42480000UL /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END 0x080FFFFFUL /*!< FLASH end address */
+#define FLASH_OTP_BASE 0x1FFF7800UL /*!< Base address of : (up to 528 Bytes) embedded FLASH OTP Area */
+#define FLASH_OTP_END 0x1FFF7A0FUL /*!< End address of : (up to 528 Bytes) embedded FLASH OTP Area */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000UL)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800UL)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00UL)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400UL)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800UL)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00UL)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000UL)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000UL)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800UL)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000UL)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400UL)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000UL)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400UL)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000UL)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100UL)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200UL)
+#define ADC123_COMMON_BASE (APB2PERIPH_BASE + 0x2300UL)
+/* Legacy define */
+#define ADC_BASE ADC123_COMMON_BASE
+
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00UL)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800UL)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00UL)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000UL)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400UL)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800UL)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000UL)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400UL)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800UL)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00UL)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000UL)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400UL)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800UL)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00UL)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000UL)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800UL)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00UL)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000UL)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400UL)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL)
+#define ETH_BASE (AHB1PERIPH_BASE + 0x8000UL)
+#define ETH_MAC_BASE (ETH_BASE)
+#define ETH_MMC_BASE (ETH_BASE + 0x0100UL)
+#define ETH_PTP_BASE (ETH_BASE + 0x0700UL)
+#define ETH_DMA_BASE (ETH_BASE + 0x1000UL)
+
+/*!< AHB2 peripherals */
+#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000UL)
+#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000UL)
+#define HASH_BASE (AHB2PERIPH_BASE + 0x60400UL)
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800UL)
+
+/*!< FSMC Bankx registers base address */
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000UL)
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104UL)
+#define FSMC_Bank2_3_R_BASE (FSMC_R_BASE + 0x0060UL)
+#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0UL)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE 0xE0042000UL
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE 0x40040000UL
+#define USB_OTG_FS_PERIPH_BASE 0x50000000UL
+
+#define USB_OTG_GLOBAL_BASE 0x000UL
+#define USB_OTG_DEVICE_BASE 0x800UL
+#define USB_OTG_IN_ENDPOINT_BASE 0x900UL
+#define USB_OTG_OUT_ENDPOINT_BASE 0xB00UL
+#define USB_OTG_EP_REG_SIZE 0x20UL
+#define USB_OTG_HOST_BASE 0x400UL
+#define USB_OTG_HOST_PORT_BASE 0x440UL
+#define USB_OTG_HOST_CHANNEL_BASE 0x500UL
+#define USB_OTG_HOST_CHANNEL_SIZE 0x20UL
+#define USB_OTG_PCGCCTL_BASE 0xE00UL
+#define USB_OTG_FIFO_BASE 0x1000UL
+#define USB_OTG_FIFO_SIZE 0x1000UL
+
+/******************* Device electronic signature ***************/
+#define UID_BASE 0x1FFF7A10UL /*!< Unique device ID register base address */
+#define FLASHSIZE_BASE 0x1FFF7A22UL /*!< FLASH Size register base address */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC123_COMMON_BASE)
+/* Legacy define */
+#define ADC ADC123_COMMON
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH ((ETH_TypeDef *) ETH_BASE)
+#define DCMI ((DCMI_TypeDef *) DCMI_BASE)
+#define CRYP ((CRYP_TypeDef *) CRYP_BASE)
+#define HASH ((HASH_TypeDef *) HASH_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2_3 ((FSMC_Bank2_3_TypeDef *) FSMC_Bank2_3_R_BASE)
+#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD_Pos (0U)
+#define ADC_SR_AWD_Msk (0x1UL << ADC_SR_AWD_Pos) /*!< 0x00000001 */
+#define ADC_SR_AWD ADC_SR_AWD_Msk /*!© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f2xx
+ * @{
+ */
+
+#ifndef __STM32F2xx_H
+#define __STM32F2xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F2)
+#define STM32F2
+#endif /* STM32F2 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx)
+
+ /* #define STM32F205xx */ /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF,
+ STM32F205RE, STM32F205VE, STM32F205ZE, STM32F205RC, STM32F205VC, STM32F205ZC,
+ STM32F205RB and STM32F205VB Devices */
+ /* #define STM32F215xx */ /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */
+ /* #define STM32F207xx */ /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF,
+ STM32F207VE, STM32F207ZE, STM32F207IE, STM32F207VC, STM32F207ZC and STM32F207IC Devices */
+ /* #define STM32F217xx */ /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */
+
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.2.3
+ */
+#define __STM32F2xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
+#define __STM32F2xx_CMSIS_VERSION_SUB1 (0x02U) /*!< [23:16] sub1 version */
+#define __STM32F2xx_CMSIS_VERSION_SUB2 (0x03U) /*!< [15:8] sub2 version */
+#define __STM32F2xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
+#define __STM32F2xx_CMSIS_VERSION ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\
+ |(__STM32F2xx_CMSIS_VERSION_SUB1 << 16)\
+ |(__STM32F2xx_CMSIS_VERSION_SUB2 << 8 )\
+ |(__STM32F2xx_CMSIS_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F205xx)
+ #include "stm32f205xx.h"
+#elif defined(STM32F215xx)
+ #include "stm32f215xx.h"
+#elif defined(STM32F207xx)
+ #include "stm32f207xx.h"
+#elif defined(STM32F217xx)
+ #include "stm32f217xx.h"
+#else
+ #error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0U,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0U,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ SUCCESS = 0U,
+ ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f2xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F2xx_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/stm32f2/include/system_stm32f2xx.h b/lib/stm32f2/include/system_stm32f2xx.h
new file mode 100644
index 00000000..ac0d6518
--- /dev/null
+++ b/lib/stm32f2/include/system_stm32f2xx.h
@@ -0,0 +1,106 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f2xx.h
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M3 Device System Source File for STM32F2xx devices.
+ ****************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f2xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F2XX_H
+#define __SYSTEM_STM32F2XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F2xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F2xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F2XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/lib/stm32f2/system_stm32f2xx.c b/lib/stm32f2/system_stm32f2xx.c
new file mode 100644
index 00000000..3c2a20b0
--- /dev/null
+++ b/lib/stm32f2/system_stm32f2xx.c
@@ -0,0 +1,346 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f2xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f2xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f2xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F2xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f2xx.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Private_Defines
+ * @{
+ */
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM mounted
+ on STM322xG_EVAL board as data memory */
+/* #define DATA_IN_ExtSRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Private_Variables
+ * @{
+ */
+
+ /* This variable can be updated in Three ways :
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 16000000;
+ const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+ const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#ifdef DATA_IN_ExtSRAM
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F2xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemFrequency variable.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#ifdef DATA_IN_ExtSRAM
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM */
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f2xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f2xx_hal_conf.h file (its value
+ * depends on the application requirements), user has to ensure that HSE_VALUE
+ * is same as the real frequency of the crystal used. Otherwise, this function
+ * may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#ifdef DATA_IN_ExtSRAM
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f2xx.s before jump to main.
+ * This function configures the external SRAM mounted on STM322xG_EVAL board
+ * This SRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+
+/*-- GPIOs Configuration -----------------------------------------------------*/
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHB1ENR |= 0x00000078;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+ (void)(tmp);
+
+ /* Connect PDx pins to FSMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FSMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FSMC Alternate function */
+ GPIOF->AFR[0] = 0x00CCCCCC;
+ GPIOF->AFR[1] = 0xCCCC0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA000AAA;
+ /* Configure PFx pins speed to 100 MHz */
+ GPIOF->OSPEEDR = 0xFF000FFF;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FSMC Alternate function */
+ GPIOG->AFR[0] = 0x00CCCCCC;
+ GPIOG->AFR[1] = 0x000000C0;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00085AAA;
+ /* Configure PGx pins speed to 100 MHz */
+ GPIOG->OSPEEDR = 0x000CAFFF;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+/*--FSMC Configuration -------------------------------------------------------*/
+ /* Enable the FSMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+
+ /* Configure and enable Bank1_SRAM2 */
+ FSMC_Bank1->BTCR[2] = 0x00001011;
+ FSMC_Bank1->BTCR[3] = 0x00000201;
+ FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/src/stm32/Kconfig b/src/stm32/Kconfig
index 4e02798f..5d6ef82b 100644
--- a/src/stm32/Kconfig
+++ b/src/stm32/Kconfig
@@ -22,6 +22,9 @@ choice
config MACH_STM32F103
bool "STM32F103"
select MACH_STM32F1
+ config MACH_STM32F207
+ bool "STM32F207"
+ select MACH_STM32F2
config MACH_STM32F405
bool "STM32F405"
select MACH_STM32F4
@@ -43,6 +46,8 @@ config MACH_STM32F0
bool
config MACH_STM32F1
bool
+config MACH_STM32F2
+ bool
config MACH_STM32F4
bool
config HAVE_STM32_USBFS
@@ -51,7 +56,7 @@ config HAVE_STM32_USBFS
default n
config HAVE_STM32_USBOTG
bool
- default y if MACH_STM32F4
+ default y if MACH_STM32F2 || MACH_STM32F4
default n
config MCU
@@ -59,6 +64,7 @@ config MCU
default "stm32f042x6" if MACH_STM32F042
default "stm32f070xb" if MACH_STM32F070
default "stm32f103xe" if MACH_STM32F103
+ default "stm32f207xx" if MACH_STM32F207
default "stm32f405xx" if MACH_STM32F405
default "stm32f407xx" if MACH_STM32F407
default "stm32f446xx" if MACH_STM32F446
@@ -68,6 +74,7 @@ config CLOCK_FREQ
default 48000000 if MACH_STM32F0
default 64000000 if MACH_STM32F103 && STM32_CLOCK_REF_INTERNAL
default 72000000 if MACH_STM32F103
+ default 120000000 if MACH_STM32F207
default 168000000 if MACH_STM32F405 || MACH_STM32F407
default 180000000 if MACH_STM32F446
@@ -76,6 +83,7 @@ config FLASH_SIZE
default 0x8000 if MACH_STM32F042
default 0x20000 if MACH_STM32F070
default 0x10000 if MACH_STM32F103 # Flash size of stm32f103x8 (64KiB)
+ default 0x40000 if MACH_STM32F2
default 0x80000 if MACH_STM32F4
config RAM_START
@@ -87,6 +95,7 @@ config RAM_SIZE
default 0x1800 if MACH_STM32F042
default 0x4000 if MACH_STM32F070
default 0x5000 if MACH_STM32F103 # Ram size of stm32f103x8 (20KiB)
+ default 0x20000 if MACH_STM32F207
default 0x20000 if MACH_STM32F4
config STACK_SIZE
@@ -94,19 +103,19 @@ config STACK_SIZE
default 512
choice
- prompt "Bootloader offset" if MACH_STM32F407 || MACH_STM32F405 || MACH_STM32F103 || MACH_STM32F070
+ prompt "Bootloader offset" if MACH_STM32F207 || MACH_STM32F407 || MACH_STM32F405 || MACH_STM32F103 || MACH_STM32F070
config STM32_FLASH_START_800
bool "2KiB bootloader (HID Bootloader)" if MACH_STM32F103
config STM32_FLASH_START_2000
bool "8KiB bootloader (stm32duino)" if MACH_STM32F103 || MACH_STM32F070
config STM32_FLASH_START_4000
- bool "16KiB bootloader (HID Bootloader)" if MACH_STM32F405 || MACH_STM32F407
+ bool "16KiB bootloader (HID Bootloader)" if MACH_STM32F207 || MACH_STM32F405 || MACH_STM32F407
config STM32_FLASH_START_5000
bool "20KiB bootloader" if MACH_STM32F103
config STM32_FLASH_START_7000
bool "28KiB bootloader" if MACH_STM32F103
config STM32_FLASH_START_8000
- bool "32KiB bootloader (SKR-PRO)" if MACH_STM32F407
+ bool "32KiB bootloader (SKR-PRO or TFT35-V3.0)" if MACH_STM32F207 || MACH_STM32F407
config STM32_FLASH_START_10000
bool "64KiB bootloader (Alfawise)" if MACH_STM32F103
config STM32_FLASH_START_0000
diff --git a/src/stm32/Makefile b/src/stm32/Makefile
index dc8768a2..98b52e4c 100644
--- a/src/stm32/Makefile
+++ b/src/stm32/Makefile
@@ -6,6 +6,7 @@ CROSS_PREFIX=arm-none-eabi-
dirs-y += src/stm32 src/generic
dirs-$(CONFIG_MACH_STM32F0) += lib/stm32f0
dirs-$(CONFIG_MACH_STM32F1) += lib/stm32f1
+dirs-$(CONFIG_MACH_STM32F2) += lib/stm32f2
dirs-$(CONFIG_MACH_STM32F4) += lib/stm32f4
MCU := $(shell echo $(CONFIG_MCU))
@@ -13,6 +14,7 @@ MCU_UPPER := $(shell echo $(CONFIG_MCU) | tr a-z A-Z | tr X x)
CFLAGS-$(CONFIG_MACH_STM32F0) += -mcpu=cortex-m0 -Ilib/stm32f0/include
CFLAGS-$(CONFIG_MACH_STM32F1) += -mcpu=cortex-m3 -Ilib/stm32f1/include
+CFLAGS-$(CONFIG_MACH_STM32F2) += -mcpu=cortex-m3 -Ilib/stm32f2/include
CFLAGS-$(CONFIG_MACH_STM32F4) += -mcpu=cortex-m4 -Ilib/stm32f4/include
CFLAGS-$(CONFIG_MACH_STM32F4) += -mfpu=fpv4-sp-d16 -mfloat-abi=hard
CFLAGS += $(CFLAGS-y) -D$(MCU_UPPER) -mthumb -Ilib/cmsis-core
@@ -31,6 +33,9 @@ src-$(CONFIG_MACH_STM32F0) += stm32/stm32f0_i2c.c
src-$(CONFIG_MACH_STM32F1) += ../lib/stm32f1/system_stm32f1xx.c
src-$(CONFIG_MACH_STM32F1) += stm32/stm32f1.c generic/armcm_timer.c
src-$(CONFIG_MACH_STM32F1) += stm32/adc.c stm32/i2c.c
+src-$(CONFIG_MACH_STM32F2) += ../lib/stm32f2/system_stm32f2xx.c
+src-$(CONFIG_MACH_STM32F2) += stm32/stm32f4.c generic/armcm_timer.c
+src-$(CONFIG_MACH_STM32F2) += stm32/adc.c stm32/i2c.c
src-$(CONFIG_MACH_STM32F4) += ../lib/stm32f4/system_stm32f4xx.c
src-$(CONFIG_MACH_STM32F4) += stm32/stm32f4.c generic/armcm_timer.c
src-$(CONFIG_MACH_STM32F4) += stm32/adc.c stm32/i2c.c
diff --git a/src/stm32/internal.h b/src/stm32/internal.h
index abe879c1..2538bbaa 100644
--- a/src/stm32/internal.h
+++ b/src/stm32/internal.h
@@ -8,6 +8,8 @@
#include "stm32f0xx.h"
#elif CONFIG_MACH_STM32F1
#include "stm32f1xx.h"
+#elif CONFIG_MACH_STM32F2
+#include "stm32f2xx.h"
#elif CONFIG_MACH_STM32F4
#include "stm32f4xx.h"
#endif
diff --git a/src/stm32/stm32f4.c b/src/stm32/stm32f4.c
index 9b5433af..bc8d0eb2 100644
--- a/src/stm32/stm32f4.c
+++ b/src/stm32/stm32f4.c
@@ -1,4 +1,4 @@
-// Code to setup clocks and gpio on stm32f4
+// Code to setup clocks and gpio on stm32f2/stm32f4
//
// Copyright (C) 2019 Kevin O'Connor
//
@@ -118,6 +118,28 @@ DECL_CONSTANT_STR("RESERVE_PINS_crystal", "PH0,PH1");
#endif
// Clock configuration
+static void
+enable_clock_stm32f20x(void)
+{
+#if CONFIG_MACH_STM32F207
+ uint32_t pll_base = 1000000, pll_freq = CONFIG_CLOCK_FREQ * 2, pllcfgr;
+ if (!CONFIG_STM32_CLOCK_REF_INTERNAL) {
+ // Configure 120Mhz PLL from external crystal (HSE)
+ uint32_t div = CONFIG_CLOCK_REF_FREQ / pll_base;
+ RCC->CR |= RCC_CR_HSEON;
+ pllcfgr = RCC_PLLCFGR_PLLSRC_HSE | (div << RCC_PLLCFGR_PLLM_Pos);
+ } else {
+ // Configure 120Mhz PLL from internal 16Mhz oscillator (HSI)
+ uint32_t div = 16000000 / pll_base;
+ pllcfgr = RCC_PLLCFGR_PLLSRC_HSI | (div << RCC_PLLCFGR_PLLM_Pos);
+ }
+ RCC->PLLCFGR = (pllcfgr | ((pll_freq/pll_base) << RCC_PLLCFGR_PLLN_Pos)
+ | (0 << RCC_PLLCFGR_PLLP_Pos)
+ | ((pll_freq/FREQ_USB) << RCC_PLLCFGR_PLLQ_Pos));
+ RCC->CR |= RCC_CR_PLLON;
+#endif
+}
+
static void
enable_clock_stm32f40x(void)
{
@@ -194,7 +216,9 @@ static void
clock_setup(void)
{
// Configure and enable PLL
- if (CONFIG_MACH_STM32F405 || CONFIG_MACH_STM32F407)
+ if (CONFIG_MACH_STM32F207)
+ enable_clock_stm32f20x();
+ else if (CONFIG_MACH_STM32F405 || CONFIG_MACH_STM32F407)
enable_clock_stm32f40x();
else
enable_clock_stm32f446();