diff --git a/klippy/extras/tmc.py b/klippy/extras/tmc.py index fbd9f584..fa2c0b57 100644 --- a/klippy/extras/tmc.py +++ b/klippy/extras/tmc.py @@ -81,11 +81,12 @@ class FieldHelper: ###################################################################### class TMCCommandHelper: - def __init__(self, config, mcu_tmc): + def __init__(self, config, mcu_tmc, current_helper): self.printer = config.get_printer() self.stepper_name = ' '.join(config.get_name().split()[1:]) self.name = config.get_name().split()[-1] self.mcu_tmc = mcu_tmc + self.current_helper = current_helper self.fields = mcu_tmc.get_fields() self.read_registers = self.read_translate = None self.toff = None @@ -99,6 +100,9 @@ class TMCCommandHelper: gcode.register_mux_command("INIT_TMC", "STEPPER", self.name, self.cmd_INIT_TMC, desc=self.cmd_INIT_TMC_help) + gcode.register_mux_command("SET_TMC_CURRENT", "STEPPER", self.name, + self.cmd_SET_TMC_CURRENT, + desc=self.cmd_SET_TMC_CURRENT_help) def _init_registers(self, print_time=None): # Send registers for reg_name, val in self.fields.registers.items(): @@ -141,6 +145,28 @@ class TMCCommandHelper: reg_val = self.fields.set_field(field_name, value) print_time = self.printer.lookup_object('toolhead').get_last_move_time() self.mcu_tmc.set_register(reg_name, reg_val, print_time) + cmd_SET_TMC_CURRENT_help = "Set the current of a TMC driver" + def cmd_SET_TMC_CURRENT(self, gcmd): + ch = self.current_helper + prev_run_current, prev_hold_current, max_current = ch.get_current() + run_current = gcmd.get_float('CURRENT', None, + minval=0., maxval=max_current) + hold_current = gcmd.get_float('HOLDCURRENT', None, + above=0., maxval=max_current) + if run_current is None and hold_current is None: + # Query only + if prev_hold_current is None: + gcmd.respond_info("Run Current: %0.2fA" % (prev_run_current,)) + else: + gcmd.respond_info("Run Current: %0.2fA Hold Current: %0.2fA" + % (prev_run_current, prev_hold_current)) + return + if run_current is None: + run_current = prev_run_current + if hold_current is None: + hold_current = prev_hold_current + print_time = self.printer.lookup_object('toolhead').get_last_move_time() + ch.set_current(run_current, hold_current, print_time) # Stepper enable/disable via comms def _do_enable(self, print_time, is_enable): toff_val = 0 diff --git a/klippy/extras/tmc2130.py b/klippy/extras/tmc2130.py index 0f503726..17467ae1 100644 --- a/klippy/extras/tmc2130.py +++ b/klippy/extras/tmc2130.py @@ -108,10 +108,6 @@ class TMCCurrentHelper: self.fields.set_field("vsense", vsense) self.fields.set_field("IHOLD", ihold) self.fields.set_field("IRUN", irun) - gcode = self.printer.lookup_object("gcode") - gcode.register_mux_command("SET_TMC_CURRENT", "STEPPER", self.name, - self.cmd_SET_TMC_CURRENT, - desc=self.cmd_SET_TMC_CURRENT_help) def _calc_current_bits(self, current, vsense): sense_resistor = self.sense_resistor + 0.020 vref = 0.32 @@ -150,24 +146,6 @@ class TMCCurrentHelper: self.fields.set_field("IHOLD", ihold) val = self.fields.set_field("IRUN", irun) self.mcu_tmc.set_register("IHOLD_IRUN", val, print_time) - cmd_SET_TMC_CURRENT_help = "Set the current of a TMC driver" - def cmd_SET_TMC_CURRENT(self, gcmd): - prev_run_current, prev_hold_current, max_current = self.get_current() - run_current = gcmd.get_float('CURRENT', None, - minval=0., maxval=max_current) - hold_current = gcmd.get_float('HOLDCURRENT', None, - above=0., maxval=max_current) - if run_current is None and hold_current is None: - # Query only - gcmd.respond_info("Run Current: %0.2fA Hold Current: %0.2fA" - % (prev_run_current, prev_hold_current)) - return - if run_current is None: - run_current = prev_run_current - if hold_current is None: - hold_current = prev_hold_current - print_time = self.printer.lookup_object('toolhead').get_last_move_time() - self.set_current(run_current, hold_current, print_time) ###################################################################### @@ -261,10 +239,10 @@ class TMC2130: # Allow virtual pins to be created tmc.TMCVirtualPinHelper(config, self.mcu_tmc) # Register commands - cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc) + current_helper = TMCCurrentHelper(config, self.mcu_tmc) + cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc, current_helper) cmdhelper.setup_register_dump(ReadRegisters) # Setup basic register values - TMCCurrentHelper(config, self.mcu_tmc) mh = tmc.TMCMicrostepHelper(config, self.mcu_tmc) self.get_microsteps = mh.get_microsteps self.get_phase = mh.get_phase diff --git a/klippy/extras/tmc2208.py b/klippy/extras/tmc2208.py index 31368e3c..5127d61e 100644 --- a/klippy/extras/tmc2208.py +++ b/klippy/extras/tmc2208.py @@ -188,13 +188,13 @@ class TMC2208: self.fields = tmc.FieldHelper(Fields, SignedFields, FieldFormatters) self.mcu_tmc = tmc_uart.MCU_TMC_uart(config, Registers, self.fields) # Register commands - cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc) + current_helper = tmc2130.TMCCurrentHelper(config, self.mcu_tmc) + cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc, current_helper) cmdhelper.setup_register_dump(ReadRegisters, self.read_translate) # Setup basic register values self.fields.set_field("pdn_disable", True) self.fields.set_field("mstep_reg_select", True) self.fields.set_field("multistep_filt", True) - tmc2130.TMCCurrentHelper(config, self.mcu_tmc) mh = tmc.TMCMicrostepHelper(config, self.mcu_tmc) self.get_microsteps = mh.get_microsteps self.get_phase = mh.get_phase diff --git a/klippy/extras/tmc2209.py b/klippy/extras/tmc2209.py index 666bba63..ceb616e9 100644 --- a/klippy/extras/tmc2209.py +++ b/klippy/extras/tmc2209.py @@ -62,13 +62,13 @@ class TMC2209: # Allow virtual pins to be created tmc.TMCVirtualPinHelper(config, self.mcu_tmc) # Register commands - cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc) + current_helper = tmc2130.TMCCurrentHelper(config, self.mcu_tmc) + cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc, current_helper) cmdhelper.setup_register_dump(ReadRegisters) # Setup basic register values self.fields.set_field("pdn_disable", True) self.fields.set_field("mstep_reg_select", True) self.fields.set_field("multistep_filt", True) - tmc2130.TMCCurrentHelper(config, self.mcu_tmc) mh = tmc.TMCMicrostepHelper(config, self.mcu_tmc) self.get_microsteps = mh.get_microsteps self.get_phase = mh.get_phase diff --git a/klippy/extras/tmc2660.py b/klippy/extras/tmc2660.py index 129974c4..44280c86 100644 --- a/klippy/extras/tmc2660.py +++ b/klippy/extras/tmc2660.py @@ -149,11 +149,6 @@ class TMC2660CurrentHelper: self.printer.register_event_handler("idle_timeout:ready", self._handle_ready) - gcode = self.printer.lookup_object("gcode") - gcode.register_mux_command("SET_TMC_CURRENT", "STEPPER", self.name, - self.cmd_SET_TMC_CURRENT, - desc=self.cmd_SET_TMC_CURRENT_help) - def _calc_current_bits(self, current, vsense): vref = 0.165 if vsense else 0.310 cs = int(32 * current * self.sense_resistor * math.sqrt(2.) / vref @@ -194,14 +189,6 @@ class TMC2660CurrentHelper: self.current = run_current self._update_current(run_current, print_time) - cmd_SET_TMC_CURRENT_help = "Set the current of a TMC2660 driver" - def cmd_SET_TMC_CURRENT(self, gcmd): - cur = gcmd.get_float('CURRENT', None, minval=0.1, maxval=MAX_CURRENT) - if cur is None: - return - print_time = self.printer.lookup_object('toolhead').get_last_move_time() - self.set_current(cur, None, print_time) - ###################################################################### # TMC2660 SPI @@ -248,7 +235,8 @@ class TMC2660: self.fields.set_field("SDOFF", 0) # Access DRVCTRL in step/dir mode self.mcu_tmc = MCU_TMC2660_SPI(config, Registers, self.fields) # Register commands - cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc) + current_helper = TMC2660CurrentHelper(config, self.mcu_tmc) + cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc, current_helper) cmdhelper.setup_register_dump(ReadRegisters) # DRVCTRL @@ -278,7 +266,6 @@ class TMC2660: # SGSCONF set_config_field(config, "SFILT", 1) set_config_field(config, "SGT", 0) - TMC2660CurrentHelper(config, self.mcu_tmc) # DRVCONF set_config_field(config, "SLPH", 0) diff --git a/klippy/extras/tmc5160.py b/klippy/extras/tmc5160.py index 4d6f921a..4447bd75 100644 --- a/klippy/extras/tmc5160.py +++ b/klippy/extras/tmc5160.py @@ -244,10 +244,6 @@ class TMC5160CurrentHelper: irun, ihold = self._calc_current(run_current, hold_current) self.fields.set_field("IHOLD", ihold) self.fields.set_field("IRUN", irun) - gcode = self.printer.lookup_object("gcode") - gcode.register_mux_command("SET_TMC_CURRENT", "STEPPER", self.name, - self.cmd_SET_TMC_CURRENT, - desc=self.cmd_SET_TMC_CURRENT_help) def _set_globalscaler(self, current): globalscaler = int((current * 256. * math.sqrt(2.) * self.sense_resistor / VREF) + .5) @@ -283,24 +279,6 @@ class TMC5160CurrentHelper: self.fields.set_field("IHOLD", ihold) val = self.fields.set_field("IRUN", irun) self.mcu_tmc.set_register("IHOLD_IRUN", val, print_time) - cmd_SET_TMC_CURRENT_help = "Set the current of a TMC driver" - def cmd_SET_TMC_CURRENT(self, gcmd): - prev_run_current, prev_hold_current, max_current = self.get_current() - run_current = gcmd.get_float('CURRENT', None, - minval=0., maxval=max_current) - hold_current = gcmd.get_float('HOLDCURRENT', None, - above=0., maxval=max_current) - if run_current is None and hold_current is None: - # Query only - gcmd.respond_info("Run Current: %0.2fA Hold Current: %0.2fA" - % (prev_run_current, prev_hold_current)) - return - if run_current is None: - run_current = prev_run_current - if hold_current is None: - hold_current = prev_hold_current - print_time = self.printer.lookup_object('toolhead').get_last_move_time() - self.set_current(run_current, hold_current, print_time) ###################################################################### @@ -315,7 +293,8 @@ class TMC5160: # Allow virtual pins to be created tmc.TMCVirtualPinHelper(config, self.mcu_tmc) # Register commands - cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc) + current_helper = TMC5160CurrentHelper(config, self.mcu_tmc) + cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc, current_helper) cmdhelper.setup_register_dump(ReadRegisters) # Setup basic register values mh = tmc.TMCMicrostepHelper(config, self.mcu_tmc) @@ -345,7 +324,6 @@ class TMC5160: set_config_field(config, "sgt", 0) set_config_field(config, "sfilt", 0) # IHOLDIRUN - TMC5160CurrentHelper(config, self.mcu_tmc) set_config_field(config, "IHOLDDELAY", 6) # PWMCONF set_config_field(config, "PWM_OFS", 30)