Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

docs: Fix unescaped angle brackets in G-Codes.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2022-02-01 12:19:23 -05:00
parent 30be45c1ae
commit 427f4b456e
1 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/G-Codes.md
View File

@ -94,13 +94,13 @@ acceleration (+/- some noise of the chip).
#### ACCELEROMETER_DEBUG_READ
`ACCELEROMETER_DEBUG_READ [CHIP=<config_name>] REG=<register>`:
queries ADXL345 register <register> (e.g. 44 or 0x2C). Can be useful
queries ADXL345 register "register" (e.g. 44 or 0x2C). Can be useful
for debugging purposes.
#### ACCELEROMETER_DEBUG_WRITE
`ACCELEROMETER_DEBUG_WRITE [CHIP=<config_name>] REG=<reg>
VAL=<value>`: Writes raw <value> into a register <register>. Both
<value> and <register> can be a decimal or a hexadecimal integer. Use
`ACCELEROMETER_DEBUG_WRITE [CHIP=<config_name>] REG=<register>
VAL=<value>`: Writes raw "value" into a register "register". Both
"value" and "register" can be a decimal or a hexadecimal integer. Use
with care, and refer to ADXL345 data sheet for the reference.
### [bed_mesh]
@ -326,7 +326,7 @@ enabled.
#### SET_FAN_SPEED
`SET_FAN_SPEED FAN=config_name SPEED=<speed>` This command sets the
speed of a fan. <speed> must be between 0.0 and 1.0.
speed of a fan. "speed" must be between 0.0 and 1.0.
### [firmware_retraction]
@ -832,9 +832,9 @@ all enabled accelerometer chips.
`TEST_RESONANCES AXIS=<axis> OUTPUT=<resonances,raw_data>
[NAME=<name>] [FREQ_START=<min_freq>] [FREQ_END=<max_freq>]
[HZ_PER_SEC=<hz_per_sec>] [INPUT_SHAPING=[<0:1>]]`: Runs the resonance
test in all configured probe points for the requested <axis> and
test in all configured probe points for the requested "axis" and
measures the acceleration using the accelerometer chips configured for
the respective axis. <axis> can either be X or Y, or specify an
the respective axis. "axis" can either be X or Y, or specify an
arbitrary direction as `AXIS=dx,dy`, where dx and dy are floating
point numbers defining a direction vector (e.g. `AXIS=X`, `AXIS=Y`, or
`AXIS=1,-1` to define a diagonal direction). Note that `AXIS=dx,dy`