lpc176x: Add hardware PWM support for LPC176x

This adds hardware PWM support for LPC176x processors.

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
This commit is contained in:
Michael Kurz 2021-03-21 19:13:47 +01:00 committed by Kevin O'Connor
parent d02c80ef08
commit 39188e1cf3
5 changed files with 107 additions and 0 deletions

View File

@ -12,6 +12,7 @@ config LPC_SELECT
select HAVE_GPIO_BITBANGING select HAVE_GPIO_BITBANGING
select HAVE_STRICT_TIMING select HAVE_STRICT_TIMING
select HAVE_CHIPID select HAVE_CHIPID
select HAVE_GPIO_HARD_PWM
config BOARD_DIRECTORY config BOARD_DIRECTORY
string string

View File

@ -22,6 +22,7 @@ src-$(CONFIG_HAVE_GPIO_SPI) += lpc176x/spi.c
src-$(CONFIG_USBSERIAL) += lpc176x/usbserial.c lpc176x/chipid.c src-$(CONFIG_USBSERIAL) += lpc176x/usbserial.c lpc176x/chipid.c
src-$(CONFIG_USBSERIAL) += generic/usb_cdc.c src-$(CONFIG_USBSERIAL) += generic/usb_cdc.c
src-$(CONFIG_SERIAL) += lpc176x/serial.c generic/serial_irq.c src-$(CONFIG_SERIAL) += lpc176x/serial.c generic/serial_irq.c
src-$(CONFIG_HAVE_GPIO_HARD_PWM) += lpc176x/hard_pwm.c
# Build the additional bin output file # Build the additional bin output file
target-y += $(OUT)klipper.bin target-y += $(OUT)klipper.bin

View File

@ -21,6 +21,13 @@ struct gpio_in gpio_in_setup(uint8_t pin, int8_t pull_up);
void gpio_in_reset(struct gpio_in g, int8_t pull_up); void gpio_in_reset(struct gpio_in g, int8_t pull_up);
uint8_t gpio_in_read(struct gpio_in g); uint8_t gpio_in_read(struct gpio_in g);
struct gpio_pwm {
void *reg;
uint8_t channel;
};
struct gpio_pwm gpio_pwm_setup(uint8_t pin, uint32_t cycle_time, uint8_t val);
void gpio_pwm_write(struct gpio_pwm g, uint32_t val);
struct gpio_adc { struct gpio_adc {
uint32_t chan; uint32_t chan;
}; };

97
src/lpc176x/hard_pwm.c Normal file
View File

@ -0,0 +1,97 @@
// Hardware PWM support on lpc176x
//
// Copyright (C) 2021 Michael Kurz <michi.kurz@gmail.com>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
#include "autoconf.h" // CONFIG_CLOCK_FREQ
#include "board/irq.h" // irq_save
#include "command.h" // shutdown
#include "gpio.h" // gpio_pwm_write
#include "internal.h" // GPIO
#include "sched.h" // sched_shutdown
#define MAX_PWM 255
DECL_CONSTANT("PWM_MAX", MAX_PWM);
struct gpio_pwm_info {
uint8_t pin, channel, function;
void *reg;
};
static const struct gpio_pwm_info pwm_regs[] = {
{GPIO(1, 18), 1, 2, (void*)&LPC_PWM1->MR1},
{GPIO(2, 0), 1, 1, (void*)&LPC_PWM1->MR1},
{GPIO(1, 20), 2, 2, (void*)&LPC_PWM1->MR2},
{GPIO(2, 1), 2, 1, (void*)&LPC_PWM1->MR2},
{GPIO(3, 25), 2, 3, (void*)&LPC_PWM1->MR2},
{GPIO(1, 21), 3, 2, (void*)&LPC_PWM1->MR3},
{GPIO(2, 2), 3, 1, (void*)&LPC_PWM1->MR3},
{GPIO(3, 26), 3, 3, (void*)&LPC_PWM1->MR3},
{GPIO(1, 23), 4, 2, (void*)&LPC_PWM1->MR4},
{GPIO(2, 3), 4, 1, (void*)&LPC_PWM1->MR4},
{GPIO(1, 24), 5, 2, (void*)&LPC_PWM1->MR5},
{GPIO(2, 4), 5, 1, (void*)&LPC_PWM1->MR5},
{GPIO(1, 26), 6, 2, (void*)&LPC_PWM1->MR6},
{GPIO(2, 5), 6, 1, (void*)&LPC_PWM1->MR6}
};
struct gpio_pwm
gpio_pwm_setup(uint8_t pin, uint32_t cycle_time, uint8_t val) {
// Find pin in pwm_regs table
const struct gpio_pwm_info* p = pwm_regs;
for (;; p++) {
if (p >= &pwm_regs[ARRAY_SIZE(pwm_regs)])
shutdown("Not a valid PWM pin");
if (p->pin == pin)
break;
}
// Map cycle_time to pwm clock divisor
uint32_t clock_div = CONFIG_CLOCK_FREQ / get_pclock_frequency(PCLK_PWM1);
uint32_t prescaler = (cycle_time / clock_div) / (MAX_PWM - 1);
if (prescaler > 0) {
prescaler -= 1;
}
gpio_peripheral(p->pin, p->function, 0);
// Enable clock
if (!is_enabled_pclock(PCLK_PWM1)) {
enable_pclock(PCLK_PWM1);
}
if (LPC_PWM1->TCR & 1) {
if (LPC_PWM1->PR != prescaler) {
shutdown("PWM already programmed at different speed");
}
} else {
LPC_PWM1->PR = (uint16_t) prescaler;
LPC_PWM1->MCR = 2;
LPC_PWM1->MR0 = MAX_PWM - 1;
LPC_PWM1->LER |= 1 << 0;
LPC_PWM1->TCR = 0x2; // Reset PWM
LPC_PWM1->TCR = 0x8; // Enable PWM mode
}
if (LPC_PWM1->PCR & (1 << (p->channel + 8))) {
shutdown("PWM output already in use");
}
struct gpio_pwm channel = {.reg = p->reg, .channel = p->channel};
gpio_pwm_write(channel, val);
// Enable channel
LPC_PWM1->PCR |= (1 << (p->channel + 8));
// Enable PWM peripheral
LPC_PWM1->TCR |= 0x1;
return channel;
}
void
gpio_pwm_write(struct gpio_pwm g, uint32_t val) {
*(volatile uint32_t*) g.reg = val;
LPC_PWM1->LER |= (1 << g.channel);
}

View File

@ -10,6 +10,7 @@
#define PCLK_TIMER0 1 #define PCLK_TIMER0 1
#define PCLK_UART0 3 #define PCLK_UART0 3
#define PCLK_PWM1 6
#define PCLK_I2C0 7 #define PCLK_I2C0 7
#define PCLK_SSP1 10 #define PCLK_SSP1 10
#define PCLK_ADC 12 #define PCLK_ADC 12