From 352f735297b50d3eaad3ebd2b78e7235a10ca25e Mon Sep 17 00:00:00 2001 From: just-trey Date: Mon, 14 Mar 2022 12:50:38 -0400 Subject: [PATCH] config: Elegoo Neptune 2 config update (#5213) Signed-off-by: Trey Wentz --- ...1.cfg => printer-elegoo-neptune2-2021.cfg} | 43 +++++++++++++------ test/klippy/printers.test | 2 +- 2 files changed, 30 insertions(+), 15 deletions(-) rename config/{printer-elegoo-neptune2-v1.2-2021.cfg => printer-elegoo-neptune2-2021.cfg} (60%) diff --git a/config/printer-elegoo-neptune2-v1.2-2021.cfg b/config/printer-elegoo-neptune2-2021.cfg similarity index 60% rename from config/printer-elegoo-neptune2-v1.2-2021.cfg rename to config/printer-elegoo-neptune2-2021.cfg index bbb27666..ed407774 100644 --- a/config/printer-elegoo-neptune2-v1.2-2021.cfg +++ b/config/printer-elegoo-neptune2-2021.cfg @@ -1,16 +1,25 @@ -# This file contains common pin mappings for the stock Elegoo -# Neptune 2 with a MKS Robin Nano (v1.2.004) board. To use this -# config, the firmware should be compiled for the STM32F103. When -# running "make menuconfig", enable "extra low-level configuration -# setup", select the 28KiB bootloader, and serial (on # USART3 -# PB11/PB10) communication. - -# Note that the "make flash" command does not work with MKS Robin -# boards. After running "make", run the following command: +# This file contains standard pin mappings for the stock Elegoo Neptune 2 with a +# ZNP Robin Nano (v 1.2 and v1.3) board. +# For the 1.2 board: +# - Compile with the processor model STM32F103. +# - Enable "extra low-level configuration options" +# - Select the 28KiB bootloader, +# - Select (Serial (on # USART3 PB11/PB10) for the communication interface. +# Note that the "make flash" command does not work with ZNP Robin boards. After +# running "make", run the following command: # ./scripts/update_mks_robin.py out/klipper.bin out/elegoo.bin -# Copy the file out/elegoo.bin to an SD card and then restart the -# printer with that SD card. - +# +# For the 1.3 board: +# - Compile with the processor model STM32F407. +# - Enable "extra low-level configuration options" +# - Select the 32KiB bootloader, +# - Select (Serial (on # USART3 PB11/PB10) for the communication interface. +# Note that the "make flash" command does not work with ZNP Robin boards. After +# running "make", run the following command: +# cp out/klipper.bin out/elegoo.bin +# +# Copy the file out/elegoo.bin to an SD card and then restart the printer with +# that SD card. # See docs/Config_Reference.md for a description of parameters. [stepper_x] @@ -51,7 +60,7 @@ step_pin: PD6 dir_pin: PD3 enable_pin: !PB3 microsteps: 16 -rotation_distance: 34.406 +rotation_distance: 34.406 # use 23.809 as a base before calibration for a 2s nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: PC3 @@ -79,7 +88,7 @@ pid_Kp: 70.857 pid_Ki: 1.221 pid_Kd: 1028.316 min_temp: 0 -max_temp: 130 +max_temp: 110 [heater_fan hotend_fan] pin: PB0 @@ -93,6 +102,12 @@ pin: PB1 serial: /dev/ttyUSB0 restart_method: command +[bed_screws] +screw1: 32.5, 32.5 +screw2: 32.5, 202.5 +screw3: 202.5, 32.5 +screw4: 202.5, 202.5 + [printer] kinematics: cartesian max_velocity: 300 diff --git a/test/klippy/printers.test b/test/klippy/printers.test index 818bd0b3..d9dba38f 100644 --- a/test/klippy/printers.test +++ b/test/klippy/printers.test @@ -161,7 +161,7 @@ CONFIG ../../config/printer-creality-ender3max-2021.cfg CONFIG ../../config/printer-creality-ender3pro-2020.cfg CONFIG ../../config/printer-creality-ender6-2020.cfg CONFIG ../../config/printer-creality-sermoonD1-2021.cfg -CONFIG ../../config/printer-elegoo-neptune2-v1.2-2021.cfg +CONFIG ../../config/printer-elegoo-neptune2-2021.cfg CONFIG ../../config/printer-eryone-er20-2021.cfg CONFIG ../../config/printer-flsun-q5-2020.cfg CONFIG ../../config/printer-flsun-qqs-2020.cfg