Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

docs: Fix incorrect error description in TMC_Drivers.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-11-19 13:05:20 -05:00
parent e772a92f16
commit 326c12728c
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
docs/TMC_Drivers.md
View File

@ -437,15 +437,15 @@ Some common errors and tips for diagnosing them:
#### TMC reports error: `... ot=1(OvertempError!)` #### TMC reports error: `... ot=1(OvertempError!)`
This indicates the motor driver disabled itself because it became too hot. Typical This indicates the motor driver disabled itself because it became too
solutions are to decrease the stepper motor current, increase cooling hot. Typical solutions are to decrease the stepper motor current,
on the stepper motor driver, and/or increase cooling on the stepper increase cooling on the stepper motor driver, and/or increase cooling
motor. on the stepper motor.
#### TMC reports error: `... ShortToGND` OR `LowSideShort` #### TMC reports error: `... ShortToGND` OR `LowSideShort`
This indicates the driver has disabled itself because it detected very high This indicates the driver has disabled itself because it detected very
current passing through the driver. This may indicate a loose or high current passing through the driver. This may indicate a loose or
shorted wire to the stepper motor or within the stepper motor itself. shorted wire to the stepper motor or within the stepper motor itself.
This error may also occur if using stealthChop mode and the TMC driver This error may also occur if using stealthChop mode and the TMC driver
@ -455,10 +455,10 @@ current through the motor and trigger its own over-current detection.)
To test this, disable stealthChop mode and check if the errors To test this, disable stealthChop mode and check if the errors
continue to occur. continue to occur.
#### TMC reports error: `... reset=1(Reset)` OR `CS_ACTUAL=0(Reset?)**OR **SE=0(Reset?)` #### TMC reports error: `... reset=1(Reset)` OR `CS_ACTUAL=0(Reset?)` OR `SE=0(Reset?)`
This indicates that the driver has reset itself This indicates that the driver has reset itself mid-print. This may be
mid-print. This may be due to voltage or wiring issues. due to voltage or wiring issues.
#### TMC reports error: `... uv_cp=1(Undervoltage!)` #### TMC reports error: `... uv_cp=1(Undervoltage!)`