From 2b3ea29f30f5169f523d02b3d899efa7ab462da5 Mon Sep 17 00:00:00 2001
From: mtw3d <36936162+mtw3d@users.noreply.github.com>
Date: Sun, 1 Dec 2019 13:31:55 -0800
Subject: [PATCH] config: Add example printer-mtw-create-2015.cfg config file

Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
---
 config/printer-mtw-create-2015.cfg | 148 +++++++++++++++++++++++++++++
 test/klippy/printers.test          |   1 +
 2 files changed, 149 insertions(+)
 create mode 100644 config/printer-mtw-create-2015.cfg

diff --git a/config/printer-mtw-create-2015.cfg b/config/printer-mtw-create-2015.cfg
new file mode 100644
index 00000000..1b8dc0f1
--- /dev/null
+++ b/config/printer-mtw-create-2015.cfg
@@ -0,0 +1,148 @@
+# This file contains pin mappings for the MTW Create (circa 2015). To
+# use this config, the firmware should be compiled for the AVR
+# atmega2560.
+
+# See the example.cfg file for a description of available parameters.
+
+[stepper_x]
+step_pin: PC0
+dir_pin: !PL1
+enable_pin: !PA7
+step_distance: .01
+endstop_pin: ^PB6
+#endstop_pin: ^PA2
+position_endstop: 0
+position_max: 250
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC1
+dir_pin: PL0
+enable_pin: !PA6
+step_distance: .01
+endstop_pin: ^PB5
+#endstop_pin: ^PA1
+position_endstop: 0
+position_max: 320
+homing_speed: 50
+
+[stepper_z]
+step_pin: PC2
+dir_pin: PL2
+enable_pin: !PA5
+step_distance: .00125
+endstop_pin: probe:z_virtual_endstop
+#endstop_pin: ^PC7
+position_endstop: 0.5
+position_max: 225
+
+[extruder]
+step_pin: PC3
+dir_pin: PL6
+enable_pin: !PA4
+step_distance: .0102
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PH6
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PF0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 275
+
+#Uncomment below for dual extruder printers
+#[extruder1]
+#step_pin: PC4
+#dir_pin: PL7
+#enable_pin: !PA3
+#heater_pin: PH4
+#sensor_pin: PF1
+#step_distance: .0102
+#nozzle_diameter: 0.400
+#filament_diameter: 1.750
+#sensor_type: ATC Semitec 104GT-2
+#sensor_pin: PF0
+#control: pid
+#pid_Kp: 22.2
+#pid_Ki: 1.08
+#pid_Kd: 114
+#min_temp: 0
+#max_temp: 275
+
+[heater_bed]
+heater_pin: PE5
+sensor_type: NTC 100K beta 3950
+sensor_pin: PF2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[bltouch]
+sensor_pin: PB4
+control_pin: PL5
+x_offset: -17
+y_offset: 37
+z_offset: 2.0
+
+[safe_z_home]
+home_xy_position: 125,150
+z_hop: 10
+z_hop_speed: 5
+
+[bed_mesh]
+mesh_min: 5,5
+mesh_max: 225,225
+
+[fan]
+pin: PH5
+
+[heater_fan nozzle_cooling_fan]
+pin: PH3
+
+[mcu]
+serial: /dev/serial/by-id/usb-UltiMachine__ultimachine.com__RAMBo_854333433343516051F1-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[ad5206 stepper_digipot]
+enable_pin: PD7
+scale: 2.08
+# Channel 1 is E0, 2 is E1, 3 is unused, 4 is Z, 5 is X, 6 is Y
+channel_1: 1.34
+channel_2: 1.0
+channel_4: 1.1
+channel_5: 1.1
+channel_6: 1.1
+
+# Enable 16 micro-steps on steppers X, Y, Z, E0, E1
+[static_digital_output stepper_config]
+pins:
+    PG1, PG0,
+    PK7, PG2,
+    PK6, PK5,
+    PK3, PK4,
+    PK1, PK2
+
+[static_digital_output yellow_led]
+pins: !PB7
+
+# Common EXP1 / EXP2 (display) pins
+[board_pins]
+aliases:
+    # Common EXP1/EXP2 headers found on RAMBo v1.4
+    EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
+    EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB3, EXP2_3=PJ5, EXP2_5=PJ6, EXP2_7=PD4, EXP2_9=<GND>,
+    EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
diff --git a/test/klippy/printers.test b/test/klippy/printers.test
index 20d6e6f1..655c0553 100644
--- a/test/klippy/printers.test
+++ b/test/klippy/printers.test
@@ -32,6 +32,7 @@ CONFIG ../../config/printer-lulzbot-taz6-2017.cfg
 CONFIG ../../config/printer-lulzbot-taz6-dual-v3-2017.cfg
 CONFIG ../../config/printer-makergear-m2-2012.cfg
 CONFIG ../../config/printer-micromake-d1-2016.cfg
+CONFIG ../../config/printer-mtw-create-2015.cfg
 CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg
 CONFIG ../../config/printer-tevo-flash-2018.cfg
 CONFIG ../../config/printer-velleman-k8200-2013.cfg