Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

docs: Update MCU_Commands.md with new config_stepper command 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-10-30 01:32:10 -04:00
parent 689231df3a
commit 14cbc6f754
1 changed files with 11 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
docs/MCU_Commands.md
View File

@ -137,12 +137,17 @@ This section lists some commonly used config commands.
sampled at regular interval using the query_analog_in command (see sampled at regular interval using the query_analog_in command (see
below). below).
* `config_stepper oid=%c step_pin=%c dir_pin=%c invert_step=%c` : This * `config_stepper oid=%c step_pin=%c dir_pin=%c invert_step=%c
command creates an internal stepper object. The 'step_pin' and step_pulse_ticks=%u` : This command creates an internal stepper
'dir_pin' parameters specify the step and direction pins object. The 'step_pin' and 'dir_pin' parameters specify the step and
respectively; this command will configure them in digital output direction pins respectively; this command will configure them in
mode. The 'invert_step' parameter specifies whether a step occurs on digital output mode. The 'invert_step' parameter specifies whether a
a rising edge (invert_step=0) or falling edge (invert_step=1). step occurs on a rising edge (invert_step=0) or falling edge
(invert_step=1). The 'step_pulse_ticks' parameter specifies the
minimum duration of the step pulse. If the mcu exports the constant
'STEPPER_BOTH_EDGE=1' then setting step_pulse_ticks=0 and
invert_step=-1 will setup for stepping on both the rising and
falling edges of the step pin.
* `config_endstop oid=%c pin=%c pull_up=%c stepper_count=%c` : This * `config_endstop oid=%c pin=%c pull_up=%c stepper_count=%c` : This
command creates an internal "endstop" object. It is used to specify command creates an internal "endstop" object. It is used to specify