From 07a90902a5a0a4e57d105d17ddf81cc9c57c4f0c Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sat, 23 Apr 2022 21:22:02 -0400 Subject: [PATCH] docs: Improve wording of screws_tilt_adjust in Config_Reference.md Reported by @JamesH1978. Signed-off-by: Kevin O'Connor --- docs/Config_Reference.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 7a6f9758..3e2a53ae 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -999,10 +999,10 @@ information. [screws_tilt_adjust] #screw1: # The (X, Y) coordinate of the first bed leveling screw. This is a -# position to command the nozzle to that is directly above the bed -# screw (or as close as possible while still being above the bed). -# This is the base screw used in calculations. This parameter must -# be provided. +# position to command the nozzle to so that the probe is directly +# above the bed screw (or as close as possible while still being +# above the bed). This is the base screw used in calculations. This +# parameter must be provided. #screw1_name: # An arbitrary name for the given screw. This name is displayed when # the helper script runs. The default is to use a name based upon