config: Add printer-tevo-flash-2018.cfg

Reported by @RadianceNL.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-03-14 10:27:37 -04:00
parent 4718f39b2f
commit 01c8705d92
2 changed files with 119 additions and 0 deletions

View File

@ -0,0 +1,118 @@
# Support for Tevo Flash using a Bondtech BMG extruder. To use this
# config, the firmware should be compiled for the AVR atmega2560.
[stepper_x]
step_pin: ar54
dir_pin: !ar55
enable_pin: !ar38
step_distance: .012491
endstop_pin: !ar3
position_endstop: -13
position_min: -13
position_max: 235
homing_speed: 50
[stepper_y]
step_pin: ar60
dir_pin: ar61
enable_pin: !ar56
step_distance: .012441
endstop_pin: !ar14
position_endstop: -3
position_min: -3
position_max: 235
homing_speed: 50
[stepper_z]
step_pin: ar46
dir_pin: ar48
enable_pin: !ar62
step_distance: .002520
position_max: 250
endstop_pin: probe:z_virtual_endstop
position_min: -2
[stepper_z1]
step_pin: ar36
dir_pin: ar34
enable_pin: !ar30
step_distance: .002520
[extruder]
step_pin: ar26
dir_pin: ar28
enable_pin: !ar24
step_distance: .002401
nozzle_diameter: 0.600
filament_diameter: 1.750
heater_pin: ar10
sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13
control: pid
pid_Kp: 18.547
pid_Ki: 0.788
pid_Kd: 109.193
min_temp: 0
max_temp: 250
[heater_bed]
heater_pin: ar8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14
control: pid
pid_Kp: 38.824
pid_Ki: 0.539
pid_Kd: 698.838
min_temp: 0
max_temp: 70
[heater_fan my_nozzle_fan]
pin: ar7
[fan]
pin: ar9
[mcu]
serial: /dev/ttyUSB0
pin_map: arduino
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 1000
max_z_velocity: 5
max_z_accel: 100
[display]
lcd_type: uc1701
cs_pin: ar25
a0_pin: ar27
encoder_pins: ^!ar31, ^!ar33
click_pin: ^!ar35
kill_pin: ar64
[bltouch]
sensor_pin: ar18
control_pin: ar11
x_offset: 0
y_offset: 18
z_offset: 1.64
# The homing_override section modifies the default G28 behavior
[homing_override]
set_position_z: 0
axes: z
gcode:
G90
G1 Z5 F600
G28 X0 Y0
G1 X118 Y118 F3600
G28 Z0
# Mesh Bed Leveling.
[bed_mesh]
samples: 3
sample_retract_dist: 5
min_point: 5,0
max_point: 230,210
probe_count: 9,9

View File

@ -27,6 +27,7 @@ CONFIG ../../config/printer-lulzbot-taz6-2017.cfg
CONFIG ../../config/printer-makergear-m2-2012.cfg
CONFIG ../../config/printer-micromake-d1-2016.cfg
CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg
CONFIG ../../config/printer-tevo-flash-2018.cfg
CONFIG ../../config/printer-velleman-k8200-2013.cfg
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg
CONFIG ../../config/printer-wanhao-duplicator-6-2016.cfg