2018-11-08 14:12:07 +01:00
|
|
|
# This file provides examples of Klipper G-Code macros. The snippets
|
|
|
|
|
# in this file may be copied into the main printer.cfg file.
|
|
|
|
|
#
|
|
|
|
|
# See the "example.cfg" file for description of common config parameters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# M300 : Play tone, Beeper support, as commonly found on usual LCD displays
|
|
|
|
|
# i.e. RepRapDiscount 2004 Smart Controller, RepRapDiscount 12864 Full Graphic
|
|
|
|
|
# This defines a custom I/O pin and a custom GCODE macro
|
|
|
|
|
# Usage: M300 [P<ms>] [S<Hz>] P is the tone duration, S the tone frequency.
|
|
|
|
|
# as it is based on a PWM duty cycle, the frequency won't be pitch perfect.
|
|
|
|
|
#
|
|
|
|
|
#[output_pin BEEPER_pin]
|
|
|
|
|
#pin: ar37
|
|
|
|
|
# Beeper pin. This parameter must be provided.
|
|
|
|
|
# ar37 is the default RAMPS/MKS pin.
|
|
|
|
|
#pwm: True
|
|
|
|
|
# A piezo beeper needs a PWM signal, a DC buzzer doesn't.
|
|
|
|
|
#value: 0
|
|
|
|
|
# Silent at power on, set to 1 if active low.
|
|
|
|
|
#shutdown_value: 0
|
|
|
|
|
# Disable at emergency shutdown (no PWM would be available anyway).
|
|
|
|
|
#cycle_time: 0.001
|
|
|
|
|
# PWM frequency : 0.001 = 1ms will give a base tone of 1kHz
|
|
|
|
|
#scale: 1000
|
|
|
|
|
# PWM parameter will be in the range of (0-1000 Hz).
|
|
|
|
|
# Although not pitch perfect.
|
|
|
|
|
#
|
|
|
|
|
#[gcode_macro M300]
|
|
|
|
|
#default_parameter_S=1000
|
|
|
|
|
# Allows for a default 1kHz tone if S is omitted
|
|
|
|
|
#default_parameter_P=100
|
|
|
|
|
# Allows for a default 10ms duration is P is omitted
|
|
|
|
|
#gcode: SET_PIN PIN=BEEPER_pin VALUE={S}
|
|
|
|
|
# G4 P{P}
|
|
|
|
|
# SET_PIN PIN=BEEPER_pin VALUE=0
|
2019-01-21 23:24:17 +01:00
|
|
|
|
|
|
|
|
# M600: Filament Change. This macro will pause the printer, move
|
|
|
|
|
# the tool to the change position, and retract the filament 50mm.
|
|
|
|
|
# Adjust the retraction settings for your own extruder. After filament
|
|
|
|
|
# has been changed, the print can be resumed from its previous position
|
|
|
|
|
# with the "RESUME" gcode
|
|
|
|
|
#
|
|
|
|
|
#[gcode_macro M600]
|
|
|
|
|
#default_parameter_X: 50
|
|
|
|
|
#default_parameter_Y: 0
|
|
|
|
|
#default_parameter_Z: 10
|
|
|
|
|
#gcode:
|
|
|
|
|
# PAUSE
|
|
|
|
|
# G91
|
|
|
|
|
# G1 E-.8 F2700
|
|
|
|
|
# G1 Z{Z}
|
|
|
|
|
# G90
|
|
|
|
|
# G1 X{X} Y{Y} F3000
|
|
|
|
|
# G91
|
|
|
|
|
# G1 E-50 F1000
|
|
|
|
|
# G90
|
