klipper-dgus/klippy/extras/screws_tilt_adjust.py

# Helper script to adjust bed screws tilt using Z probe
#
# Copyright (C) 2019  Rui Caridade <rui.mcbc@gmail.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import math
import probe

def parse_coord(config, param):
    pair = config.get(param).strip().split(',', 1)
    try:
        return (float(pair[0]), float(pair[1]))
    except:
        raise config.error("%s:%s needs to be an x,y coordinate" % (
            config.get_name(), param))

class ScrewsTiltAdjust:
    def __init__(self, config):
        self.config = config
        self.printer = config.get_printer()
        self.screws = []
        # Verify that a probe exists
        try:
            self.printer.lookup_object("probe")
        except:
            raise self.gcode.error("Error: you must have a probe on "
                                   "your config file.")
        # Read config
        for i in range(99):
            prefix = "screw%d" % (i + 1,)
            if config.get(prefix, None) is None:
                break
            screw_coord = parse_coord(config, prefix)
            screw_name = "screw at %.3f,%.3f" % screw_coord
            screw_name = config.get(prefix + "_name", screw_name)
            self.screws.append((screw_coord, screw_name))
        if len(self.screws) < 3:
            raise config.error("screws_tilt_adjust: Must have "
                               "at least three screws")
        self.threads = {'CW-M3': 0, 'CCW-M3': 1, 'CW-M4': 2, 'CCW-M4': 3,
                        'CW-M5': 4, 'CCW-M5': 5}
        self.thread = config.getchoice('screw_thread', self.threads,
                                       default='CW-M3')
        # Initialize ProbePointsHelper
        points = [coord for coord, name in self.screws]
        self.probe_helper = probe.ProbePointsHelper(self.config,
                                                    self.probe_finalize,
                                                    default_points=points)
        self.probe_helper.minimum_points(3)
        # Register command
        self.gcode = self.printer.lookup_object('gcode')
        self.gcode.register_command("SCREWS_TILT_CALCULATE",
                                    self.cmd_SCREWS_TILT_CALCULATE,
                                    desc=self.cmd_SCREWS_TILT_CALCULATE_help)
    cmd_SCREWS_TILT_CALCULATE_help = "Tool to help adjust bed leveling " \
                                     "screws by calculating the number " \
                                     "of turns to level it."

    def cmd_SCREWS_TILT_CALCULATE(self, params):
        self.probe_helper.start_probe(params)

    def probe_finalize(self, offsets, positions):
        # Factors used for CW-M3, CCW-M3, CW-M4, CCW-M4, CW-M5 and CCW-M5
        threads_factor = {0: 0.5, 1: 0.5, 2: 0.7, 3: 0.7, 4: 0.8, 5: 0.8}
        # Process the read Z values and
        for i, screw in enumerate(self.screws):
            if i == 0:
                # First screw is the base position used for comparison
                z_base = positions[i][2]
                coord_base, name_base = screw
                # Show the results
                self.gcode.respond_info("%s (Base): X %.1f, Y %.1f, Z %.5f" %
                                        (name_base, coord_base[0],
                                         coord_base[1], z_base))
            else:
                # Calculate how knob must me adjusted for other positions
                z = positions[i][2]
                coord, name = screw
                diff = z_base - z
                if abs(diff) < 0.001:
                    adjust = 0
                else:
                    adjust = diff / threads_factor.get(self.thread, 0.5)
                if (self.thread & 1) == 1:
                    sign = "CW" if adjust < 0 else "CCW"
                else:
                    sign = "CCW" if adjust < 0 else "CW"
                full_turns = math.trunc(adjust)
                decimal_part = adjust - full_turns
                minutes = round(decimal_part * 60, 0)
                # Show the results
                self.gcode.respond_info("%s : X %.1f, Y %.1f, Z %.5f : "
                                        "Adjust -> %s %02d:%02d" %
                                        (name, coord[0], coord[1], z, sign,
                                         abs(full_turns), abs(minutes)))

def load_config(config):
    return ScrewsTiltAdjust(config)