klipper-dgus/klippy/extras/display/display.cfg

# This file defines the default layout of the printer's lcd display.


######################################################################
# Display templates
######################################################################

[display_template _heater_temperature]
param_heater_name: "extruder"
text:
  {% if param_heater_name in printer %}
    {% set heater = printer[param_heater_name] %}
    # Show glyph
    {% if param_heater_name == "heater_bed" %}
      {% if heater.target %}
        ~animated_bed~
      {% else %}
        ~bed~
      {% endif %}
    {% else %}
      ~extruder~
    {% endif %}
    # Show temperature
    { "%3.0f" % (heater.temperature,) }
    # Optionally show target
    {% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
      ~right_arrow~
      { "%0.0f" % (heater.target,) }
    {% endif %}
    ~degrees~
  {% endif %}

[display_template _print_status]
text:
  {% if printer.display_status.message %}
    { printer.display_status.message }
  {% elif printer.idle_timeout.printing_time or printer.gcode.busy %}
    {% set pos = printer.toolhead.position %}
    { "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
  {% else %}
    Ready
  {% endif %}


######################################################################
# Default 16x4 display
######################################################################

[display_data _default_16x4 extruder]
position: 0, 0
text: { render("_heater_temperature", param_heater_name="extruder") }

[display_data _default_16x4 fan]
position: 0, 10
text:
  {% if 'fan' in printer %}
    {% set speed = printer.fan.speed %}
    {% if speed %}
      ~animated_fan~
    {% else %}
      ~fan~
    {% endif %}
    { "{:>4.0%}".format(speed) }
  {% endif %}

[display_data _default_16x4 row1col0]
position: 1, 0
text:
  {% if 'extruder1' in printer %}
    # A multi-extruder setup uses an alternate screen layout
    { render("_heater_temperature", param_heater_name="extruder1") }
  {% else %}
    { render("_heater_temperature", param_heater_name="heater_bed") }
  {% endif %}

[display_data _default_16x4 ro1col10]
position: 1, 10
text:
  {% if 'extruder1' in printer %}
    # A multi-extruder setup uses an alternate screen layout
    {% set progress = printer.display_status.progress %}
    { "{:^6}".format(progress) }
  {% else %}
    ~feedrate~
    { "{:>4.0%}".format(printer.gcode.speed_factor) }
  {% endif %}

[display_data _default_16x4 row2col0]
position: 2, 0
text:
  {% if 'extruder1' in printer %}
    # A multi-extruder setup uses an alternate screen layout
    { render("_heater_temperature", param_heater_name="heater_bed") }
  {% else %}
    {% set progress = printer.display_status.progress %}
    { "{:^10.0%}".format(progress) }
  {% endif %}

[display_data _default_16x4 printing_time]
position: 2, 10
text:
  {% set ptime = printer.idle_timeout.printing_time %}
  {% set progress = printer.display_status.progress %}
  {% if progress >= 0.05 and ptime % 12 >= 6 %}
    {% set rtime = (ptime / progress) - ptime %}
    { "-%02d:%02d" % (rtime // (60 * 60), (rtime // 60) % 60) }
  {% else %}
    {% set msg = "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) %}
    { "%6s" % (msg,) }
  {% endif %}

[display_data _default_16x4 print_status]
position: 3, 0
text: { render("_print_status") }

[display_data _default_16x4 progress_bar]
position: 3, 16 # Render graphical progress bar after text is written
text:
  {% set progress = printer.display_status.progress %}
  {% if 'extruder1' in printer %}
    # A multi-extruder setup uses an alternate screen layout
    { draw_progress_bar(1, 10, 6, progress) }
  {% else %}
    { draw_progress_bar(2, 0, 10, progress) }
  {% endif %}


######################################################################
# Default 20x4 display
######################################################################

[display_data _default_20x4 extruder]
position: 0, 0
text: { render("_heater_temperature", param_heater_name="extruder") }

[display_data _default_20x4 heater_bed]
position: 0, 10
text: { render("_heater_temperature", param_heater_name="heater_bed") }

[display_data _default_20x4 extruder1]
position: 1, 0
text: { render("_heater_temperature", param_heater_name="extruder1") }

[display_data _default_20x4 fan]
position: 1, 10
text:
  {% if 'fan' in printer %}
    { "Fan {:^4.0%}".format(printer.fan.speed) }
  {% endif %}

[display_data _default_20x4 speed_factor]
position: 2, 0
text:
  ~feedrate~
  { "{:^4.0%}".format(printer.gcode.speed_factor) }

[display_data _default_20x4 print_progress]
position: 2, 8
text:
  {% if 'virtual_sdcard' in printer and printer.virtual_sdcard.progress %}
    ~sd~
  {% else %}
    ~usb~
  {% endif %}
  { "{:^4.0%}".format(printer.display_status.progress) }

[display_data _default_20x4 printing_time]
position: 2, 14
text:
  {% set seconds = printer.idle_timeout.printing_time %}
  ~clock~
  { "%02d:%02d" % (seconds // (60 * 60), (seconds // 60) % 60) }

[display_data _default_20x4 print_status]
position: 3, 0
text: { render("_print_status") }