mirror of https://github.com/Desuuuu/klipper.git
37 lines
1.3 KiB
INI
37 lines
1.3 KiB
INI
|
# This file provides examples of Klipper G-Code macros. The snippets
|
||
|
|
# in this file may be copied into the main printer.cfg file.
|
||
|
|
#
|
||
|
|
# See the "example.cfg" file for description of common config parameters.
|
||
|
|
|
||
|
|
|
||
|
|
# M300 : Play tone, Beeper support, as commonly found on usual LCD displays
|
||
|
|
# i.e. RepRapDiscount 2004 Smart Controller, RepRapDiscount 12864 Full Graphic
|
||
|
|
# This defines a custom I/O pin and a custom GCODE macro
|
||
|
|
# Usage: M300 [P<ms>] [S<Hz>] P is the tone duration, S the tone frequency.
|
||
|
|
# as it is based on a PWM duty cycle, the frequency won't be pitch perfect.
|
||
|
|
#
|
||
|
|
#[output_pin BEEPER_pin]
|
||
|
|
#pin: ar37
|
||
|
|
# Beeper pin. This parameter must be provided.
|
||
|
|
# ar37 is the default RAMPS/MKS pin.
|
||
|
|
#pwm: True
|
||
|
|
# A piezo beeper needs a PWM signal, a DC buzzer doesn't.
|
||
|
|
#value: 0
|
||
|
|
# Silent at power on, set to 1 if active low.
|
||
|
|
#shutdown_value: 0
|
||
|
|
# Disable at emergency shutdown (no PWM would be available anyway).
|
||
|
|
#cycle_time: 0.001
|
||
|
|
# PWM frequency : 0.001 = 1ms will give a base tone of 1kHz
|
||
|
|
#scale: 1000
|
||
|
|
# PWM parameter will be in the range of (0-1000 Hz).
|
||
|
|
# Although not pitch perfect.
|
||
|
|
#
|
||
|
|
#[gcode_macro M300]
|
||
|
|
#default_parameter_S=1000
|
||
|
|
# Allows for a default 1kHz tone if S is omitted
|
||
|
|
#default_parameter_P=100
|
||
|
|
# Allows for a default 10ms duration is P is omitted
|
||
|
|
#gcode: SET_PIN PIN=BEEPER_pin VALUE={S}
|
||
|
|
# G4 P{P}
|
||
|
|
# SET_PIN PIN=BEEPER_pin VALUE=0
|