klipper-dgus/lib/samd51/samd51a/include/instance/eic.h

74 lines
4.3 KiB
C
Raw Normal View History

/**
* \file
*
* \brief Instance description for EIC
*
* Copyright (c) 2018 Microchip Technology Inc.
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
#ifndef _SAMD51_EIC_INSTANCE_
#define _SAMD51_EIC_INSTANCE_
/* ========== Register definition for EIC peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_EIC_CTRLA (0x40002800) /**< \brief (EIC) Control A */
#define REG_EIC_NMICTRL (0x40002801) /**< \brief (EIC) Non-Maskable Interrupt Control */
#define REG_EIC_NMIFLAG (0x40002802) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */
#define REG_EIC_SYNCBUSY (0x40002804) /**< \brief (EIC) Synchronization Busy */
#define REG_EIC_EVCTRL (0x40002808) /**< \brief (EIC) Event Control */
#define REG_EIC_INTENCLR (0x4000280C) /**< \brief (EIC) Interrupt Enable Clear */
#define REG_EIC_INTENSET (0x40002810) /**< \brief (EIC) Interrupt Enable Set */
#define REG_EIC_INTFLAG (0x40002814) /**< \brief (EIC) Interrupt Flag Status and Clear */
#define REG_EIC_ASYNCH (0x40002818) /**< \brief (EIC) External Interrupt Asynchronous Mode */
#define REG_EIC_CONFIG0 (0x4000281C) /**< \brief (EIC) External Interrupt Sense Configuration 0 */
#define REG_EIC_CONFIG1 (0x40002820) /**< \brief (EIC) External Interrupt Sense Configuration 1 */
#define REG_EIC_DEBOUNCEN (0x40002830) /**< \brief (EIC) Debouncer Enable */
#define REG_EIC_DPRESCALER (0x40002834) /**< \brief (EIC) Debouncer Prescaler */
#define REG_EIC_PINSTATE (0x40002838) /**< \brief (EIC) Pin State */
#else
#define REG_EIC_CTRLA (*(RwReg8 *)0x40002800UL) /**< \brief (EIC) Control A */
#define REG_EIC_NMICTRL (*(RwReg8 *)0x40002801UL) /**< \brief (EIC) Non-Maskable Interrupt Control */
#define REG_EIC_NMIFLAG (*(RwReg16*)0x40002802UL) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */
#define REG_EIC_SYNCBUSY (*(RoReg *)0x40002804UL) /**< \brief (EIC) Synchronization Busy */
#define REG_EIC_EVCTRL (*(RwReg *)0x40002808UL) /**< \brief (EIC) Event Control */
#define REG_EIC_INTENCLR (*(RwReg *)0x4000280CUL) /**< \brief (EIC) Interrupt Enable Clear */
#define REG_EIC_INTENSET (*(RwReg *)0x40002810UL) /**< \brief (EIC) Interrupt Enable Set */
#define REG_EIC_INTFLAG (*(RwReg *)0x40002814UL) /**< \brief (EIC) Interrupt Flag Status and Clear */
#define REG_EIC_ASYNCH (*(RwReg *)0x40002818UL) /**< \brief (EIC) External Interrupt Asynchronous Mode */
#define REG_EIC_CONFIG0 (*(RwReg *)0x4000281CUL) /**< \brief (EIC) External Interrupt Sense Configuration 0 */
#define REG_EIC_CONFIG1 (*(RwReg *)0x40002820UL) /**< \brief (EIC) External Interrupt Sense Configuration 1 */
#define REG_EIC_DEBOUNCEN (*(RwReg *)0x40002830UL) /**< \brief (EIC) Debouncer Enable */
#define REG_EIC_DPRESCALER (*(RwReg *)0x40002834UL) /**< \brief (EIC) Debouncer Prescaler */
#define REG_EIC_PINSTATE (*(RoReg *)0x40002838UL) /**< \brief (EIC) Pin State */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* ========== Instance parameters for EIC peripheral ========== */
#define EIC_EXTINT_NUM 16 // Number of external interrupts
#define EIC_GCLK_ID 4 // Generic Clock index
#define EIC_NUMBER_OF_CONFIG_REGS 2 // Number of CONFIG registers
#define EIC_NUMBER_OF_DPRESCALER_REGS 2 // Number of DPRESCALER pin groups
#define EIC_NUMBER_OF_INTERRUPTS 16 // Number of external interrupts (obsolete)
#endif /* _SAMD51_EIC_INSTANCE_ */