klipper-dgus/klippy/klippy.py

#!/usr/bin/env python2
# Main code for host side printer firmware
#
# Copyright (C) 2016-2018  Kevin O'Connor <kevin@koconnor.net>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import sys, os, optparse, logging, time, threading, collections, importlib
import util, reactor, queuelogger, msgproto, homing
import gcode, configfile, pins, heater, mcu, toolhead

message_ready = "Printer is ready"

message_startup = """
Printer is not ready
The klippy host software is attempting to connect.  Please
retry in a few moments.
"""

message_restart = """
Once the underlying issue is corrected, use the "RESTART"
command to reload the config and restart the host software.
Printer is halted
"""

message_protocol_error = """
This type of error is frequently caused by running an older
version of the firmware on the micro-controller (fix by
recompiling and flashing the firmware).
Once the underlying issue is corrected, use the "RESTART"
command to reload the config and restart the host software.
Protocol error connecting to printer
"""

message_mcu_connect_error = """
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Error configuring printer
"""

message_shutdown = """
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Printer is shutdown
"""

class Printer:
    config_error = configfile.error
    command_error = homing.CommandError
    def __init__(self, input_fd, bglogger, start_args):
        self.bglogger = bglogger
        self.start_args = start_args
        self.reactor = reactor.Reactor()
        self.reactor.register_callback(self._connect)
        self.state_message = message_startup
        self.is_shutdown = False
        self.run_result = None
        self.event_handlers = {}
        gc = gcode.GCodeParser(self, input_fd)
        self.objects = collections.OrderedDict({'gcode': gc})
    def get_start_args(self):
        return self.start_args
    def get_reactor(self):
        return self.reactor
    def get_state_message(self):
        return self.state_message
    def _set_state(self, msg):
        if self.state_message in (message_ready, message_startup):
            self.state_message = msg
        if (msg != message_ready
            and self.start_args.get('debuginput') is not None):
            self.request_exit('error_exit')
    def add_object(self, name, obj):
        if obj in self.objects:
            raise self.config_error(
                "Printer object '%s' already created" % (name,))
        self.objects[name] = obj
    def lookup_object(self, name, default=configfile.sentinel):
        if name in self.objects:
            return self.objects[name]
        if default is configfile.sentinel:
            raise self.config_error("Unknown config object '%s'" % (name,))
        return default
    def lookup_objects(self, module=None):
        if module is None:
            return list(self.objects.items())
        prefix = module + ' '
        objs = [(n, self.objects[n])
                for n in self.objects if n.startswith(prefix)]
        if module in self.objects:
            return [(module, self.objects[module])] + objs
        return objs
    def set_rollover_info(self, name, info, log=True):
        if log:
            logging.info(info)
        if self.bglogger is not None:
            self.bglogger.set_rollover_info(name, info)
    def try_load_module(self, config, section):
        if section in self.objects:
            return self.objects[section]
        module_parts = section.split()
        module_name = module_parts[0]
        py_name = os.path.join(os.path.dirname(__file__),
                               'extras', module_name + '.py')
        py_dirname = os.path.join(os.path.dirname(__file__),
                                  'extras', module_name, '__init__.py')
        if not os.path.exists(py_name) and not os.path.exists(py_dirname):
            return None
        mod = importlib.import_module('extras.' + module_name)
        init_func = 'load_config'
        if len(module_parts) > 1:
            init_func = 'load_config_prefix'
        init_func = getattr(mod, init_func, None)
        if init_func is not None:
            self.objects[section] = init_func(config.getsection(section))
            return self.objects[section]
    def _read_config(self):
        self.objects['configfile'] = pconfig = configfile.PrinterConfig(self)
        config = pconfig.read_main_config()
        if self.bglogger is not None:
            pconfig.log_config(config)
        # Create printer components
        for m in [pins, heater, mcu]:
            m.add_printer_objects(config)
        for section_config in config.get_prefix_sections(''):
            self.try_load_module(config, section_config.get_name())
        for m in [toolhead]:
            m.add_printer_objects(config)
        # Validate that there are no undefined parameters in the config file
        pconfig.check_unused_options(config)
    def _connect(self, eventtime):
        try:
            self._read_config()
            for cb in self.event_handlers.get("klippy:connect", []):
                if self.state_message is not message_startup:
                    return
                cb()
        except (self.config_error, pins.error) as e:
            logging.exception("Config error")
            self._set_state("%s%s" % (str(e), message_restart))
            return
        except msgproto.error as e:
            logging.exception("Protocol error")
            self._set_state("%s%s" % (str(e), message_protocol_error))
            return
        except mcu.error as e:
            logging.exception("MCU error during connect")
            self._set_state("%s%s" % (str(e), message_mcu_connect_error))
            return
        except Exception as e:
            logging.exception("Unhandled exception during connect")
            self._set_state("Internal error during connect: %s\n%s" % (
                str(e), message_restart,))
            return
        try:
            self._set_state(message_ready)
            for cb in self.event_handlers.get("klippy:ready", []):
                if self.state_message is not message_ready:
                    return
                cb()
        except Exception as e:
            logging.exception("Unhandled exception during ready callback")
            self.invoke_shutdown("Internal error during ready callback: %s" % (
                str(e),))
    def run(self):
        systime = time.time()
        monotime = self.reactor.monotonic()
        logging.info("Start printer at %s (%.1f %.1f)",
                     time.asctime(time.localtime(systime)), systime, monotime)
        # Enter main reactor loop
        try:
            self.reactor.run()
        except:
            logging.exception("Unhandled exception during run")
            return "error_exit"
        # Check restart flags
        run_result = self.run_result
        try:
            if run_result == 'firmware_restart':
                for n, m in self.lookup_objects(module='mcu'):
                    m.microcontroller_restart()
            self.send_event("klippy:disconnect")
        except:
            logging.exception("Unhandled exception during post run")
        return run_result
    def invoke_shutdown(self, msg):
        if self.is_shutdown:
            return
        self.is_shutdown = True
        self._set_state("%s%s" % (msg, message_shutdown))
        for cb in self.event_handlers.get("klippy:shutdown", []):
            try:
                cb()
            except:
                logging.exception("Exception during shutdown handler")
    def invoke_async_shutdown(self, msg):
        self.reactor.register_async_callback(
            (lambda e: self.invoke_shutdown(msg)))
    def register_event_handler(self, event, callback):
        self.event_handlers.setdefault(event, []).append(callback)
    def send_event(self, event, *params):
        return [cb(*params) for cb in self.event_handlers.get(event, [])]
    def request_exit(self, result):
        if self.run_result is None:
            self.run_result = result
        self.reactor.end()


######################################################################
# Startup
######################################################################

def arg_dictionary(option, opt_str, value, parser):
    key, fname = "dictionary", value
    if '=' in value:
        mcu_name, fname = value.split('=', 1)
        key = "dictionary_" + mcu_name
    if parser.values.dictionary is None:
        parser.values.dictionary = {}
    parser.values.dictionary[key] = fname

def main():
    usage = "%prog [options] <config file>"
    opts = optparse.OptionParser(usage)
    opts.add_option("-i", "--debuginput", dest="debuginput",
                    help="read commands from file instead of from tty port")
    opts.add_option("-I", "--input-tty", dest="inputtty",
                    default='/tmp/printer',
                    help="input tty name (default is /tmp/printer)")
    opts.add_option("-l", "--logfile", dest="logfile",
                    help="write log to file instead of stderr")
    opts.add_option("-v", action="store_true", dest="verbose",
                    help="enable debug messages")
    opts.add_option("-o", "--debugoutput", dest="debugoutput",
                    help="write output to file instead of to serial port")
    opts.add_option("-d", "--dictionary", dest="dictionary", type="string",
                    action="callback", callback=arg_dictionary,
                    help="file to read for mcu protocol dictionary")
    options, args = opts.parse_args()
    if len(args) != 1:
        opts.error("Incorrect number of arguments")
    start_args = {'config_file': args[0], 'start_reason': 'startup'}

    input_fd = bglogger = None

    debuglevel = logging.INFO
    if options.verbose:
        debuglevel = logging.DEBUG
    if options.debuginput:
        start_args['debuginput'] = options.debuginput
        debuginput = open(options.debuginput, 'rb')
        input_fd = debuginput.fileno()
    else:
        input_fd = util.create_pty(options.inputtty)
    if options.debugoutput:
        start_args['debugoutput'] = options.debugoutput
        start_args.update(options.dictionary)
    if options.logfile:
        bglogger = queuelogger.setup_bg_logging(options.logfile, debuglevel)
    else:
        logging.basicConfig(level=debuglevel)
    logging.info("Starting Klippy...")
    start_args['software_version'] = util.get_git_version()
    if bglogger is not None:
        versions = "\n".join([
            "Args: %s" % (sys.argv,),
            "Git version: %s" % (repr(start_args['software_version']),),
            "CPU: %s" % (util.get_cpu_info(),),
            "Python: %s" % (repr(sys.version),)])
        logging.info(versions)
    elif not options.debugoutput:
        logging.warning("No log file specified!"
                        " Severe timing issues may result!")

    # Start Printer() class
    while 1:
        if bglogger is not None:
            bglogger.clear_rollover_info()
            bglogger.set_rollover_info('versions', versions)
        printer = Printer(input_fd, bglogger, start_args)
        res = printer.run()
        if res in ['exit', 'error_exit']:
            break
        time.sleep(1.)
        logging.info("Restarting printer")
        start_args['start_reason'] = res

    if bglogger is not None:
        bglogger.stop()

    if res == 'error_exit':
        sys.exit(-1)

if __name__ == '__main__':
    main()