Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/config/printer-creality-ender3-201...

110 lines
2.4 KiB
INI
Raw Normal View History

config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
# This file contains common pin mappings for the 2018 Creality
# Ender 3. To use this config, the firmware should be compiled for the
# AVR atmega1284p.
config: Use consistent advice on flashing the Melzi board Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 20:32:52 +01:00
# Note, a number of Melzi boards are shipped with a bootloader that
# requires the following command to flash the board:
# avrdude -p atmega1284p -c arduino -b 57600 -P /dev/ttyUSB0 -U out/klipper.elf.hex
# If the above command does not work and "make flash" does not work
# then one may need to flash a bootloader to the board - see the
# Klipper docs/Bootloaders.md file for more information.
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-17 00:47:32 +01:00
# See docs/Config_Reference.md for a description of parameters.
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
[stepper_x]
step_pin: PD7
dir_pin: !PC5
enable_pin: !PD6
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 40
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
endstop_pin: ^PC2
position_endstop: 0
config: Update printer-creality-ender3-2018.cfg (#959) Added options necessary for basic extruder calibration expected of a new install. Fixed bed size to correct 235x235. Removed 0.5 position_endstop setting as this crashes hot end into the bed on stock Ender 3's. Signed-off-by: Troy nadeau <troyboy162@hotmail.com>
2018-12-05 22:43:14 +01:00
position_max: 235
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
homing_speed: 50
[stepper_y]
step_pin: PC6
dir_pin: !PC7
enable_pin: !PD6
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 40
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
endstop_pin: ^PC3
position_endstop: 0
config: Update printer-creality-ender3-2018.cfg (#959) Added options necessary for basic extruder calibration expected of a new install. Fixed bed size to correct 235x235. Removed 0.5 position_endstop setting as this crashes hot end into the bed on stock Ender 3's. Signed-off-by: Troy nadeau <troyboy162@hotmail.com>
2018-12-05 22:43:14 +01:00
position_max: 235
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
homing_speed: 50
[stepper_z]
step_pin: PB3
dir_pin: PB2
enable_pin: !PA5
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 8
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
endstop_pin: ^PC4
config: Update printer-creality-ender3-2018.cfg (#959) Added options necessary for basic extruder calibration expected of a new install. Fixed bed size to correct 235x235. Removed 0.5 position_endstop setting as this crashes hot end into the bed on stock Ender 3's. Signed-off-by: Troy nadeau <troyboy162@hotmail.com>
2018-12-05 22:43:14 +01:00
position_endstop: 0.0
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
position_max: 250
[extruder]
config: Update printer-creality-ender3-2018.cfg (#959) Added options necessary for basic extruder calibration expected of a new install. Fixed bed size to correct 235x235. Removed 0.5 position_endstop setting as this crashes hot end into the bed on stock Ender 3's. Signed-off-by: Troy nadeau <troyboy162@hotmail.com>
2018-12-05 22:43:14 +01:00
max_extrude_only_distance: 100.0
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
step_pin: PB1
dir_pin: !PB0
enable_pin: !PD6
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 33.683
config: Add printer config for the Ender 3 by Creality3D - Changed max positions - Tuned PIDs for my stock Ender 3 heaters (using 200/50) - Added the serial device as 'by-id'. Not sure if that is working as I expect it :) - I did set the position endstop to 0.5 .. Not sure if people like that. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 13:40:18 +02:00
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PD5
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA7
control: pid
# tuned for stock hardware with 200 degree Celsius target
pid_Kp: 21.527
pid_Ki: 1.063
pid_Kd: 108.982
min_temp: 0
max_temp: 250
[heater_bed]
heater_pin: PD4
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA6
control: pid
# tuned for stock hardware with 50 degree Celsius target
pid_Kp: 54.027
pid_Ki: 0.770
pid_Kd: 948.182
min_temp: 0
max_temp: 130
[fan]
pin: PB4
[mcu]
serial: /dev/ttyUSB0
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[display]
lcd_type: st7920
cs_pin: PA3
sclk_pin: PA1
sid_pin: PC1
config: Added pins for LCD encoder and button click on Creality Ender 3 (#574) Signed-off-by: Gonzalo Ramírez <controla@gmail.com>
2018-08-27 05:05:13 +02:00
encoder_pins: ^PD2, ^PD3
click_pin: ^!PC0
config: Add homing order not to Ender 3 config (#3069) By homing the y axis before the x axis, the nozzle will not touch the plastic cover of the bed heater cable. Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
2020-08-10 03:12:09 +02:00
# The print bed can move so far to the front, that the nozzle can reach the
# plastic cover of the print bed heater cable (only when the bed is moved by
# hand). By homing the Y axis before the X axis, it is ensured the nozzle will
# not melt through the plastic part.
# BEWARE: You will lose the ability to home axes individually. The printer will
# always home all axes for every G28 command.
#[homing_override]
#gcode:
# G28 Y0
# G28 X0
# G28 Z0