Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/test/klippy/sdcard_loop.cfg

93 lines
1.6 KiB
INI
Raw Permalink Normal View History

loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
# Test config for sdcard_loop
[virtual_sdcard]
path: test/klippy/sdcard_loop
[display_status]
# Override to support unlimited belt size
# (homing Z simply resets its virtual position to 0.0)
[homing_override]
axes: xyz
set_position_x: 0
set_position_y: 0
set_position_z: 0
gcode:
G92 X0 Y0 Z0
[stepper_x]
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
step_pin: PF0
dir_pin: PF1
enable_pin: !PD7
test: Update test cases to use rotation_distance Remove all users of step_distance from test configs. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 02:53:36 +02:00
microsteps: 16
rotation_distance: 40
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
endstop_pin: ^PE5
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
position_endstop: 0
position_max: 200
homing_speed: 50
[stepper_y]
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
step_pin: PF6
dir_pin: !PF7
enable_pin: !PF2
test: Update test cases to use rotation_distance Remove all users of step_distance from test configs. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 02:53:36 +02:00
microsteps: 16
rotation_distance: 40
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
endstop_pin: ^PJ1
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
position_endstop: 0
position_max: 200
homing_speed: 50
[stepper_z]
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
step_pin: PL3
dir_pin: PL1
enable_pin: !PK0
test: Update test cases to use rotation_distance Remove all users of step_distance from test configs. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 02:53:36 +02:00
microsteps: 16
rotation_distance: 8
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
endstop_pin: ^PD3
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
position_endstop: 0.5
position_max: 200000000
[extruder]
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
step_pin: PA4
dir_pin: PA6
enable_pin: !PA2
test: Update test cases to use rotation_distance Remove all users of step_distance from test configs. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 02:53:36 +02:00
microsteps: 16
rotation_distance: 33.5
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
nozzle_diameter: 0.500
filament_diameter: 3.500
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
heater_pin: PB4
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
sensor_type: EPCOS 100K B57560G104F
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
sensor_pin: PK5
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 210
[heater_bed]
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
heater_pin: PH5
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
sensor_type: EPCOS 100K B57560G104F
test: Update test case to not use pin_map Remove all users of the pin_map setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-25 03:11:53 +02:00
sensor_pin: PK6
loop_sdcard: Add loopable SD card file sections To support continuous belt printing, add nestable repeat loop support via an `[sdcard_loop]` module. Supported G-Code: - SDCARD_LOOP_BEGIN COUNT=n ; Loop for N times, or infinitely if N is 0 - SDCARD_LOOP_END ; End of loop - SDCARD_LOOP_DESIST ; Complete all loops without iterating Marlin M808 compatibility example in `config/sample-macros.cfg`: - M808 Ln ; Loop for N times, or infinitely if N is 0 - M808 ; End of loop - M808 K ; Complete all loops without iterating Added unit tests in test/klippy/sdcard_loop.test See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2021-04-17 12:54:12 +02:00
control: watermark
min_temp: 0
max_temp: 110
[mcu]
serial: /dev/ttyACM0
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[sdcard_loop]
[gcode_macro M808]
gcode:
{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}